3Pcs Beitian BS-280 232 GPS Receiver Module 1PPS Timing With Flash + GPS Antenna
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 15 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Returns
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Bob Shop ID
615104740
Description:
232 level output, 9600, 1HZ output, standard NMEA-0183 protocol output.
The pins of the module are: ? 1.PPS, there is a second pulse output after positioning, the pulse period is 1s, and the high level lasts for 100ms, which is used for system synchronization. 2. GND, ground. 3.TX, the data output of the module. 4.RX, the data input of the module. 5.VCC, 3.6-5.5V, recommended 5.0V. 6. BOOT, please hang out during normal work.
Package included:
3 x?Beitian BS-280 232 GPS Receiver Module
3 x cable
232 level output, 9600, 1HZ output, standard NMEA-0183 protocol output.
| Parameter | Description | |
| ? ? Chip characteristics ? ? | Chip | U-blox U7 |
| Receiving mode | GPS, QZSS, WAAS, SBAS, EGNOS, MSAS | |
| Frequency | GPSL1, SBAS L1 | |
| Channel | 56 search channels | |
| ? Sensitivity | Track | -162dBm |
| Recapture | -160dBm | |
| Cold start | -148dBm | |
| ? Precision | Horizontal accuracy | 2.0 m CEP 2D RMS SBAS assist (open space) |
| Speed accuracy | 0.1m/s 95% (SA off) | |
| Time accuracy | 1us | |
| ? Start Time | Cold start | 29s |
| Warm start | 25s | |
| Hot Start | 1s | |
| ? ? Output Data | Baud rate | 4800bps-921600bps,default 9600bps |
| Output level | TTL or RS232, default RS-232 level | |
| Output protocol | Default NMEA-0183 protocol | |
| Standard GNSS | 1Hz-10Hz, default 1Hz | |
| ? Work limit | Height | 50,000m maximum |
| Speed | 515m/s maximum | |
| Gravity acceleration | 4g maximum | |
| Power consumption | Voltage | DC 3.6V-5.5V, typical: 5.0V |
| Current | Normal 45mA@5.0V | |
| ? Physical parameter | Size | 28mm*28mm*8mm |
| Weight | 11.5?grams | |
| Line length | 2m | |
| Connector | 1.25 pitch 6pin socket | |
| Surroundings | Operating temperature | -40 ?ﾣC ~ +85 ?ﾣC |
| storage temperature | -40?ﾣC ~ +85?ﾣC | |
| Indicator light | TX light | Power-on blue light flashes to indicate that there is data output. |
| PPS light | The light is not lit when it is not positioned. After 3D positioning, it starts to blink. | |
The pins of the module are: ? 1.PPS, there is a second pulse output after positioning, the pulse period is 1s, and the high level lasts for 100ms, which is used for system synchronization. 2. GND, ground. 3.TX, the data output of the module. 4.RX, the data input of the module. 5.VCC, 3.6-5.5V, recommended 5.0V. 6. BOOT, please hang out during normal work.
Package included:
3 x?Beitian BS-280 232 GPS Receiver Module
3 x cable