3pcs Hydraulic Cylinder Piston Rod Seal U Cup Installation Tool(18cm)

The inner diameter of the oil seal is different, so choose different tool sizes (S size. M size. L size).Different hydraulic cylinder depths, choose different length tools (120 length. 180.280.380.500).Tool S is suitable for most oil seals with an inner diameter of 22MM-40MM and an oil seal lip width below 8MMThe M auxiliary tool is suitable for most oil seals with an inner diameter of 40MM-70MM, and the width of the oil seal lip is below 11MML tool is suitable for most oil seal inner diameter 70mm-165mm, oil seal lip width below 14mmThick stainless steel material, tie rod seal twister, oil seal installation tool.The oil seal installation tool and the tie rod seal twister can buckle the seal into an ohm shape without producing any acute angles.It can be installed in a deep hole. The outer size of the seal is smaller than the inner hole of the end cover to assist the installation of the oil seal. U-shapedThe seal rod seal installation tool is a good assistant for installing oil seal static seal, dynamic seal and rotary seal.After checking. The tie rod seal can safely cross the acute angles of all metal grooves and complete the installation after resetting.installation steps:1. Put one of the handles into the socket, and then hang the seal on the curved arm2. Pull the other handle with the right hand, and turn the seal with the left hand at the same time to twist3. Hold the handle firmly, put the seal into the end, and carefully fill the seal into the groove4. Loosen the handle, pull out the twister after the rotary seal rebounds and resetsColour:silverMaterial:ironSize:18cmPackage Contents:3 x Hydraulic cylinder piston rodOnly the above package content, other products are not included.Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.