4M Butyl Rubber Glue Sealant Motorcycle Car Truck Headlight LED Retrofit Reseal Strip Black
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 15 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Returns
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Bob Shop ID
615177969
Description: Glue Sealant Car Truck Headlight Reseal Strip
About Rubber Glue Sealant: Rubber Sealant is a black, non-drying, non-hardening synthetic rubber based butyl rubber
sealant suitable for use as a placement sealant tape for re-sealing headlights after a retrofit
or for installation between the glass and metal/llastic areas of automotive headlights/windscreen.
It will remain permanently sealing and waterproofing.
? Specification: ?Material: Synthetic Butyl Rubber ?Color:? Balck ?Size: 4M (enough for re-sealing about two - four headlight assemblies.) ?Thickness: Approx. 9mm ( 0.35'')?(1cm=0.39Inches) ? Application: 1.After removing the headlamp cover or windshield, the pinch weld areas should be dry, clean,
free from dust, oil and grease. Release the sealant from the release paper and press
it sufficiently around the pinch weld for a complete contact. 2.When properly positioned, the tape should be continuously attached to the pinch
weld before you seal it with the other coupling part. The purpose of the sealer is to provide
for a watertight seal. In cold weather conditions it is best to warm the tape prior to
attempting the installation, as this will soften the tape allowing for better workability.
?Note: ?1.Please allow 1-3cm error due to manual measurement. Please make sure you do not mind before you bid. ?2.The colors may have different as the difference display, please understand.
? Package Included: ?1 X Headlight Sealant
About Rubber Glue Sealant: Rubber Sealant is a black, non-drying, non-hardening synthetic rubber based butyl rubber
sealant suitable for use as a placement sealant tape for re-sealing headlights after a retrofit
or for installation between the glass and metal/llastic areas of automotive headlights/windscreen.
It will remain permanently sealing and waterproofing.
? Specification: ?Material: Synthetic Butyl Rubber ?Color:? Balck ?Size: 4M (enough for re-sealing about two - four headlight assemblies.) ?Thickness: Approx. 9mm ( 0.35'')?(1cm=0.39Inches) ? Application: 1.After removing the headlamp cover or windshield, the pinch weld areas should be dry, clean,
free from dust, oil and grease. Release the sealant from the release paper and press
it sufficiently around the pinch weld for a complete contact. 2.When properly positioned, the tape should be continuously attached to the pinch
weld before you seal it with the other coupling part. The purpose of the sealer is to provide
for a watertight seal. In cold weather conditions it is best to warm the tape prior to
attempting the installation, as this will soften the tape allowing for better workability.
?Note: ?1.Please allow 1-3cm error due to manual measurement. Please make sure you do not mind before you bid. ?2.The colors may have different as the difference display, please understand.
? Package Included: ?1 X Headlight Sealant