4Pcs 40700-1AY1A Tire Pressure Sensor TPMS for 2009-2010 40700-JY10B 315MHz

No sensor programming Required : The Tire Pressure Sensor is new and come pre-programmed specifically for your make\/model\/year of vehicle,need activate them by scal tool or \re-learning\.Simplified Relearn : AUTO Relearn Installation of TPMS is recommended to be performed only by trained .Part Number:40700-1AY1AMPREHENSIVE VEHICLE COVERAGE Installation Process:Loosen the tire: Remove the valve cap and core and deflate the tire.Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o'clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.Dismount the sensor: with a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.Mount the tire: Place the tire on the rim, making sure that the valve the separation head at an angle of 180 degrees. Mount the tire over the rim.Fit Car:for GT-R Premium, Pure 6Cyl 3.8L VR38DETT 2009-2011for GT-R Premium 3.8L V6 - Gas 2010for GT-R Base 3.8L V6 - Gas 2010for GT-R 3.8L V6 Automatic Dual Clutch Base 2010for GT-R 3.8L V6 Automatic Dual Clutch Premium 2010Colour: greenMaterial: ABSPackage Contents:4 * Tire Pressure SensorOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +\/- 1-3cm.