Main centres: | 1-3 business days |
Regional areas: | 3-4 business days |
Remote areas: | 3-5 business days |
The 4S 30A 14.8V Li-ion Lithium 18650 Battery BMS is a Battery Management System designed for use with lithium-ion batteries in a 4-series configuration. It provides protection against overcharging, over-discharging, and short circuiting.
Specifications:
Details | Specification |
Continuous discharge current | 30(MAX)A |
Instantaneous discharge current | 70A |
Charging voltage | 16.8V |
Charging current | 30(MAX)A |
Overcharge detection voltage | 4.280.05V |
Overcharge protection delay | 0.1S |
Overcharge release voltage | 4.080.01V |
Battery balance detection voltage | 4.20.025V |
Battery balance release voltage | 4.20.05V |
Electricity balance current | 605mA |
Over discharge detection voltage | 2.550.08V |
Over discharge detection delay | 0.1S |
Over discharge release voltage | 3.00.1V |
Overcurrent detection voltage | 150mV |
Overcurrent detection delay | 9mS |
Overcurrent protection current | 755A |
Overcurrent protection release condition | Disconnect load |
Short circuit protection condition | External load short circuit |
Short circuit detection delay | 250uS |
Short circuit protection release condition | Disconnect the load switch |
Temperature protection | / |
Main circuit conduction internal resistance | 15m |
Working current | 30uA |
Sleep current (when the battery is over-discharged) | 10uA |
Operating temperature | -30~+80 |
Size | 45x56mm |
Main function:
Over charge protection, over discharge protection function, short circuit protection
function, over current protection function, band balance.
Interface definition:
Charging port of the plate and the discharge port is the same, both positive and B- connecting
battery"-", P- charging port and port on the negative electrode;
B-, N-, P- pads are all over the hole, the hole diameter of the pad is 3.5mm;
The battery charging detection interface with DC output in the form of needle. Do the same mouth
when the N- is not wiring.
Package Contents:
1 x 4S 30A 14.8V Li-ion Lithium 18650 Battery Protection board
Note:
This is New Version: MOS ultra-low internal resistance, alloy resistance is greater, and overcurrent capability is more enhanced.