550m Multi Mode SFP Module | Dual LC Interface | Gigabit SFP miniGBIC | Cisco & Generic Network S...
Check my rate
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Product information
550m Multi Mode SFP Module | Dual LC Interface | Gigabit SFP miniGBIC | Cisco & Generic Network Switches
These Fiber SFP modules have been individually programmed to be compatible with Cisco and is 100% compatible with other generic sfp coding brands such as Tenda, Hikvision, TPLink, TrendNet, Netgear, Ubiquiti / Unifi and generic OEM brands.
This SFP is Hot-Pluggable and it can be inserted into a Network or POE Network Switch without the need to power-down the switch.
The small form-factor pluggable (SFP) is a compact, hot-pluggable network interface module used for both telecommunication and data communications applications. An SFP interface on networking hardware is a modular (plug-and-play) slot for a media-specific transceiver in order to connect a fiber optic cable or sometimes a copper cable.
Please see our guide at Fiber Optic Cables & SFP Compatibility for more information.
Product Features
- Support IEEE802.3 and Fiber Channel Applications
- Dual LC Connectors fiber data link with 1.25G GbE
- Support up to 550m Transmission on Duplex Multi Mode Fiber Cables 50/125 micron or 62.5/125 micron
- Connector: 2x LC UPC per Module
- Data Rate: 1.25Gbps
- Operation case temperature -40~85C for Industrial, and 0~70C for commercial
- RoHS6 Compliant
- Wave Length : 850nm
Example of Dual LC Fiber SFP Installation (Multi Mode OM3 Cable to be used and NOT Single Mode)
Operating Conditions
| Parameter | Unit | Min | Typical | Max |
| Storage Temperature | C | -40 | 85 | |
| Operating Case Temp for C-temp | C | 0 | 70 | |
| Operating Case Temp for I-temp | C | -40 | 85 | |
| Power Supply Voltage | V | 3.1 | 3.3 | 3.5 |
| Supply Current | mA | 300 | ||
| Bit Rate for GE | Mpbs | 1250 | ||
| Bit Rate for Fiber Channel | Mpbs | 1062.5 | ||
These Dual LC Multi Mode SFP Modules are commonly installed with the Duplex Multi-Mode LC to LC Fiber Cables Below:
/1m-duplex-multimode-om3-fiber-cable-upc-lc-lc-fiber-cable-fiber-patch-cord/
Below are Network Switches and POE Network Switches commonly used with these SFP's to enable the switches to be up-linked by Fiber Cables
/24-port-gigabit-unmanaged-network-switch-with-2x-sfp-slots-teg1024f/
/6-port-power-over-ethernet-poe-gigabit-network-switch-with-fiber-1gbps-rj45-uplink-port-incl-52v-1-25a-psu-15-4w-per-port-max-ieee-802-3af-at/
SFP Module Installation Instructional Video
?v=vuu0gjWEORg