5MP Camera Module 5 Megapixel 175 Focal Adjustable Length Night Vision NoIR Camera with Automatic
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 12 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Returns
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Bob Shop ID
615104345
???Introduction :
The Raspberry Pi IR-CUT Camera is the day and night camera , automatic turn the mode by identify the intensity of light. You can get the best imaging whatever it is in the daytime or in dark. It`s a built-in IR-CUT camera, can be used during the day and night , together with the 175 degree fish eye widr angle lens , it is suitable for surveillance camera , webcam and other use .
Note: the 175 degree is a physical theoretical value , not the same with value measured by protractor.
Feature :
1. Raspberry Pi Camera, supports all revisions of the Raspberry Pi. ( support Raspberry Pi 3 Model B+ ) 2. Embedded removable IR-CUT filter, eliminating color distortion in the daylight 3. Comes with infrared LED, supports night vision 4. 5 megapixel OV5647 sensor 5. Camera specifications 6. CCD size: 1 / 4inch 7. Aperture (F): 1.8 8. Focal Length: 3.6mm adjustable 9. Field of View ( Physical ): 175 degree 10. Sensor best resolution: 1080p 11. 4 screw holes to fix the IR lights or holder. 12. Used for attachment 13. Provides 3.3V power output 14. Supports connecting infrared LED and / or fill flash LED 15. Dimension: 31 mm ?? 32 mm
Tip:
Hardware connection: 1. Soft cable, 90-degree vertical connector, HDMI port next to it. When connecting the contact side facing the HDMI interface. 2. Remove the protective film before using the lens 3. bare boards, pay attention to ESD damage, guard against static electricity!
Package Included:
1 x Night Vision Camera? 2 x IR Lights 1 x 15 cm Raspberry Pi 3 Camera Cable ( not include Raspberry Pi )
The Raspberry Pi IR-CUT Camera is the day and night camera , automatic turn the mode by identify the intensity of light. You can get the best imaging whatever it is in the daytime or in dark. It`s a built-in IR-CUT camera, can be used during the day and night , together with the 175 degree fish eye widr angle lens , it is suitable for surveillance camera , webcam and other use .
Note: the 175 degree is a physical theoretical value , not the same with value measured by protractor.
Feature :
1. Raspberry Pi Camera, supports all revisions of the Raspberry Pi. ( support Raspberry Pi 3 Model B+ ) 2. Embedded removable IR-CUT filter, eliminating color distortion in the daylight 3. Comes with infrared LED, supports night vision 4. 5 megapixel OV5647 sensor 5. Camera specifications 6. CCD size: 1 / 4inch 7. Aperture (F): 1.8 8. Focal Length: 3.6mm adjustable 9. Field of View ( Physical ): 175 degree 10. Sensor best resolution: 1080p 11. 4 screw holes to fix the IR lights or holder. 12. Used for attachment 13. Provides 3.3V power output 14. Supports connecting infrared LED and / or fill flash LED 15. Dimension: 31 mm ?? 32 mm
Tip:
Hardware connection: 1. Soft cable, 90-degree vertical connector, HDMI port next to it. When connecting the contact side facing the HDMI interface. 2. Remove the protective film before using the lens 3. bare boards, pay attention to ESD damage, guard against static electricity!
Package Included:
1 x Night Vision Camera? 2 x IR Lights 1 x 15 cm Raspberry Pi 3 Camera Cable ( not include Raspberry Pi )
