7S 24V Lithium Battery 3.7V Power Protection Board 70A

7S 24V Lithium Battery 3.7V Power Protection Board 70A

Name: 7S 24V Lithium Battery 3.7V Power Protection Board 70A
SKU: 10004046
Price: 1195.00 ZAR
Availability: InStock

New

Add to watch list

Add to cart

Shipping

Standard courier shipping from R30

R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate

Collect from a locker or counter from R5

There are various locker and counter collection points across South Africa.
View locations

Free collection from Laser Park, Roodepoort

The seller allows collection for this item and will be in contact with the full collection address once the order is ready. Ready for collection by Tuesday, 21 May.

Ready to ship in

The seller has indicated that they will usually have this item ready to ship within 3 business days. Shipping time depends on your delivery address. The most accurate delivery time will be calculated at checkout, but in general, the following shipping times apply:

Standard Delivery

Main centres:	1-3 business days
Regional areas:	3-4 business days
Remote areas:	3-5 business days

Get it now, pay later

Seller

Electromann SA4719

99.11% Positive ratings

Buyer Protection

How you're covered

Product details

Condition

New

Location

South Africa

Product code

10004046

Bob Shop ID

606293012

7S 24V Lithium Battery 3.7V Power Protection Board with Temperature Protection Equalization Function, Overcurrent Protection - 70A (10004046)

BMS is for battery use, different strings are not compatible.

E.g: 13S BMS, can not be used for 10S battery, can only be used on 13S battery.

Description:

Range: nominal voltage is 3.6V, 3.7V lithium battery (including 18650, 26650, polymer battery).

Function: Overcharge protection function, over discharge protection function, over current protection function, short circuit protection function, battery balance management function, temperature protection function.

Products: 7S or more adopts Zhongying integrated scheme circuit, and 7S or less adopts single-section cascade scheme circuit.

Charging

Charge current: Same as continuous current

Charging voltage29.75V

Over charge protection

Overcharge detection voltage4.25V0.05V

Overcharge release voltage4.15V0.05V

Overcharge protection delay600uS

Over discharge protection

Over discharge protection voltage: 2.7V 0.1V

Over discharge release voltage3V0.05V

Over discharge detect delay600uS

Balance

Balance detection voltage4.18V

Balanced release voltage4.18V

Balance current35mA5mA

Overcurrent protection

Instantaneous current: continuous current * 2.5

Overcurrent detection delay600uS

Overcurrent detection voltage100mV

Overcurrent protection release condition: Disconnect load

Short circuit protection

Short circuit protection condition: External load short circuit

Short circuit detection delay600uS

Short circuit protection release condition; Disconnect load

Temp Protection

Charging temperature: 65

Discharge temperature: 65

Remove temperature control protection: within working temperature

Inner resistance

Main circuit on-resistance10m

Self electricity consume

Working current100uA

Sleep current (when the battery is over-discharged)20uA

Working Temp

temperature range-20/+80

Package Contents:

1 x 7S 24V Lithium Battery 3.7V Power Protection Board 70A

Use the queue of operations:

1. The cable starts from the black thin wire connecting B-, the second wire (the thin red wire) is connected to the positive pole of the first battery, and the positive pole of each battery is connected in turn until the last red wire is connected to B+;

2. After connecting the cable, do not insert the plug directly into the BMS. Measure the voltage between each two adjacent metal terminals on the back of the plug. If the voltage of the terpolymer battery should be between 2.8V and 4.2V, the iron-lithium battery should be between 2.5V and 3.65V.

3. After correct wiring queue and voltage confirmation, insert the BMS socket.

4. The protective board B line (blue thick line) is connected to the negative pole of the battery pack.

5. After the wiring is completed, measure whether the total voltage of the battery pack and the total voltage passing through the BMS are equal. If they are different, check again according to the above wiring queue.

Tips:

The battery pack protection board, which is a semi-finished product of electronic products, is a wearing part in case of wrong use.

If you don't understand how to use it, please read the manual carefully or ask the customer service. Any wrong use will burn out the front-end sampling resistor. We will not accept such disputes of customer damage. Please do not buy if you mind.

Report a problem