Air Conditioner A/C Oil Dye Injector Low Side Quick Coupler R134A Refrigerant Charging Hose Gauge R1

[R134A charging hose] 19-inch (approximately 48.3 cm) with 2.75-inch (approximately 7 cm) air conditioning instrument, R-134a can be connected to the R-12\/R-22 service port, 1\/4-inch (approximately 0.6 cm) end is suitable R12, 22, 502 accessories. The meter has ratio readings of R134, R12 and 22.[Oil and Dye Injector Refrigeration Tool] Suitable for automotive air-conditioning refrigeration systems filled with R134A, R12, R22. Low-voltage couplers (inner diameter 13 mm) to 1\/4 inch SAE male and 8v1 female threads are suitable for automotive AC systems and all home office . 2 ounces (approximately 56.7 ml) can be filled with 60 ml capacity aluminum cans of oiling machine. Put oil or fluorescent dye into the system. Once hit, it may solidify and save the compressor caused by low oil.[High quality] A professional field service tool, aluminum alloy body, brass connector has a 1\/4 inch (about 0.6 cm) female connector on a high pressure hose, tested by the manufacturer to durability and Lasting use.[Easy to install] Connect the charging hose to the car service port, add oil during vacuum exhaust or cold storage charging, add cold storage oil or leak detection dye. The instructions include installation instructions for oil stained syringes.A\/C oil injector:Water tank capacity: 56.83 gConnection: 0.64 cm SAE male and female.Coupler Adapter #1: Low voltage coupler (13 mm ID) to 1\/4 inch SAE male.Coupler adapter #2: 1\/4 SAE female to low-voltage R134A quick coupler and 8v1 female thread.Rated working pressure: 3000 psi burst \/ maximum 600 psi working pressureWith ball valve.Installation Notes: This syringe can be used in our system to add most A\/C additives, from oils, dyes, to prevent leakage, etc.Before adding any additives to the syringe, the shut-off valve must be closed.Unscrew e end of the syringe.Put in the required dosage.Screw back onto the syringe.Connect the R134A R12 F22 connector to the syringe.Connect the other end of the injector to the low-side service port of the vehicle.Open the valve of the syringe.It is filled with cold storage agent and filled with appropriate pressure.After using the syringe tool, use the brake to clean it.Colour: blueMaterial: aluminumPackage Contents:1 x oil injector1 x refrigerant inflation Hose1 x quick connector1 x adapterNote:1. Before injecting additives or refrigerants, the compressor must be turned on to turn on the air conditioner.Only the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +\/- 1-3cm.