| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
The Air Mass Sensor is listed for the vehicle applications below. Confirm compatibility by matching the listed fitment details and any OEM reference numbers supplied. Verify VIN/engine.
| Specification | Value |
|---|---|
| Pins | 5-pin |
This air mass sensor is listed for 22 applications across Audi, SEAT, Volkswagen. Use the full table below to confirm model, chassis, year range, engine and power before ordering.
View Full Vehicle Fitment (22 applications)| Make | Model | Chassis | Years | Engine | Power |
|---|---|---|---|---|---|
| Audi | A3 / S3 | 8P1 | 2003-2012 | 2.0 TFSI (AXX, BWA, CAWB, CCZA) | 147 kW / 200 HP |
| Audi | A3 / S3 | 8P1 | 2003-2012 | S3 quattro (BZC, CDLC) | 188 kW / 256 HP |
| Audi | A3 / S3 Sportback | 8PA | 2005-2013 | 2.0 TFSI (AXX, BWA, CAWB, CBFA, CCZA) | 147 kW / 200 HP |
| Audi | A3 / S3 Sportback | 8PA | 2005-2013 | S3 quattro (CDLC) | 188 kW / 256 HP |
| Audi | A4 / S4 B7 | 8EC | 2005-2009 | 2.0 TFSI (BGB, BWE) | 147 kW / 200 HP |
| Audi | A4 / S4 B7 | 8EC | 2005-2009 | 2.0 TFSI quattro (BGB, BPG, BWE) | 147 kW / 200 HP |
| Audi | A4 / S4 B7 Avant | 8ED | 2005-2008 | 2.0 TFSI (BGB, BPG, BWE) | 147 kW / 200 HP |
| Audi | A4 / S4 B7 Avant | 8ED | 2005-2008 | 2.0 TFSI quattro (BUL) | 162 kW / 220 HP |
| Audi | A4 / S4 B7 Convertible | 8HE | 2006-2010 | 2.0 TFSI 16V (BWE) | 147 kW / 200 HP |
| Audi | A6 / S6 C6 | 4F2 | 2004-2011 | 2.0 TFSI (BPJ) | 125 kW / 170 HP |
| Audi | A6 C6 Avant | 4F5 | 2004-2009 | 2.0 TFSI (BPJ) | 125 kW / 170 HP |
| Audi | TT | 8J3 | 2006-2015 | 2.0 TFSI (BWA) | 147 kW / 200 HP |
| Audi | TT Roadster | 8J9 | 2007-2014 | 2.0 TFSI (BWA) | 147 kW / 200 HP |
| SEAT | LEON | 1P1 | 2005-2012 | 2.0 TFSI (BWA) | 147 kW / 200 HP |
| SEAT | LEON | 1P1 | 2005-2012 | 2.0 TFSI (BWJ, CDLD) | 177 kW / 240 HP |
| Volkswagen | EOS | 1F7, 1F8 | 2007-2011 | 2.0 TFSI (BWA, CAWB, CBFA, CCZA) | 147 kW / 200 HP |
| Volkswagen | GOLF V | 1K1 | 2003-2009 | 2.0 GTI (AXX, BWA, CAWB) | 147 kW / 200 HP |
| Volkswagen | GOLF VI | 5K1 | 2008-2013 | 2.0 GTI Edition 35 (CDLG) | 173 kW / 235 HP |
| Volkswagen | GOLF VI | 5K1 | 2008-2013 | 2.0 R 4motion (CDLC, CRZA) | 188 kW / 256 HP |
| Volkswagen | JETTA V | 1K2 | 2005-2011 | 2.0 TFSI (AXX, BPY, BWA, CAWB, CBFA, CCTA) | 147 kW / 200 HP |
| Volkswagen | PASSAT B6 | 3C2 | 2005-2011 | 2.0 TFSI (AXX, BPY, BWA, CAWB, CBFA, CCTA, CCZA) | 147 kW / 200 HP |
| Volkswagen | SCIROCCO III | 137, 138 | 2009-2018 | 2.0 R (CDLC) | 188 kW / 256 HP |
Professional Fitment Required: Electronic, electrical, and electromechanical components require correct identification before installation. Compare the new unit to the removed unit and verify mounting orientation, terminal or connector type, pin count or terminal arrangement, voltage rating, polarity, and any pulley or bracket configuration where applicable. Incorrect installation, polarity reversal, water or moisture ingress, improper connector seating, or mismatched specifications can damage the component, related ECU systems, or cause persistent fault codes. Installation by a qualified, VAT-registered workshop with appropriate diagnostic equipment is recommended.
Returns Notice: Once an electronic, electrical, or electromechanical component has been fitted, plugged in, energised, or shows signs of installation, returns are limited to manufactur...
