| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
The Air Mass Sensor is listed for the vehicle applications below. Confirm compatibility by matching the listed fitment details and any OEM reference numbers supplied. Verify VIN/engine.
| Specification | Value |
|---|---|
| Pins | 5-pin |
This air mass sensor is listed for 21 applications across Mercedes-Benz. Use the full table below to confirm model, chassis, year range, engine and power before ordering.
View Full Vehicle Fitment (21 applications)| Model | Chassis | Years | Engine | Power |
|---|---|---|---|---|
| 124 Saloon | W124 | 1984-1993 | 220 E (124.022) (M 111.960) | 110 kW / 150 HP |
| C-CLASS | W202 | 1993-2000 | C 180 (202.018) (M 111.920, M 111.921) | 90 kW / 122 HP |
| C-CLASS | W202 | 1993-2000 | C 200 (202.020) (M 111.941, M 111.945) | 100 kW / 136 HP |
| C-CLASS | W202 | 1993-2000 | C 230 (202.023) (M 111.974) | 110 kW / 150 HP |
| C-CLASS | W202 | 1993-2000 | C 230 Kompressor (202.024) (M 111.975) | 142 kW / 193 HP |
| C-CLASS | W202 | 1993-2000 | C 250 Turbo-D (202.128) (OM 605.960) | 110 kW / 150 HP |
| C-CLASS T-Model | S202 | 1996-2001 | C 200 T (202.080) (M 111.941, M 111.945) | 100 kW / 136 HP |
| C-CLASS T-Model | S202 | 1996-2001 | C 200 T Kompressor (202.082) (M 111.944) | 141 kW / 192 HP |
| C-CLASS T-Model | S202 | 1996-2001 | C 230 T (202.083) (M 111.974) | 110 kW / 150 HP |
| C-CLASS T-Model | S202 | 1996-2001 | C 250 T Turbo-D (202.188) (OM 605.960) | 110 kW / 150 HP |
| CLK | C208 | 1997-2002 | CLK 230 Kompressor (208.347) (M 111.973, M 111.975) | 142 kW / 193 HP |
| CLK Convertible | A208 | 1998-2002 | CLK 230 Kompressor (208.447) (M 111.973, M 111.975) | 142 kW / 193 HP |
| E-CLASS | W124 | 1993-1995 | E 220 (124.022) (M 111.960) | 110 kW / 150 HP |
| E-CLASS | W210 | 1995-2002 | E 200 (210.035) (M 111.942) | 100 kW / 136 HP |
| E-CLASS | W210 | 1995-2002 | E 200 Kompressor (210.045) (M 111.947) | 137 kW / 186 HP |
| E-CLASS | W210 | 1995-2002 | E 230 (210.037) (M 111.970) | 110 kW / 150 HP |
| SLK | R170 | 1996-2004 | 200 (170.435) (M 111.946) | 100 kW / 136 HP |
| SLK | R170 | 1996-2004 | 200 Kompressor (170.445) (M 111.943) | 141 kW / 192 HP |
| SLK | R170 | 1996-2004 | 230 Kompressor (170.447) (M 111.973) | 142 kW / 193 HP |
| VITO Bus | W638 | 1999-2003 | 112 CDI 2.2 (638.194) (OM 611.980) | 90 kW / 122 HP |
| VITO Van | W638 | 1997-2003 | 112 CDI 2.2 (638.094) (OM 611.980) | 90 kW / 122 HP |
Professional Fitment Required: Electronic, electrical, and electromechanical components require correct identification before installation. Compare the new unit to the removed unit and verify mounting orientation, terminal or connector type, pin count or terminal arrangement, voltage rating, polarity, and any pulley or bracket configuration where applicable. Incorrect installation, polarity reversal, water or moisture ingress, improper connector seating, or mismatched specifications can damage the component, related ECU systems, or cause persistent fault codes. Installation by a qualified, VAT-registered workshop with appropriate diagnostic equipment is recommended.
Returns Notice: Once an electronic, electrical, or electromechanical component has been fitted, plugged in, energised, or shows signs of installation, returns are limited to manufacturing defect only. Confirm part compatibility before opening sealed packaging.
