Ancel PB100 Automotive Power Circuit Probe Tester, 12V-24V Car Electrical System Test Tool

WE ARE EXCLUSIVE AUTHORISED DISTRIBUTOR OF ANCEL

Ancel PB100 Automotive circuit tester is designed for both professional mechanics and home-use customers. Supporting equipment electrical systems from 12V to 24V. It reads the real-time data of voltage, current, and resistance quickly and accurately. Assist you to track and locate short circuit and check bad grounding contact.

Features:

• Wide Application: ANCEL PB100circuit tester is a fast and efficient electrical scanning probe, works on all 12-24V vehicle electrical systems, including cars, boats, trailers, fuel pumps, relays, and more.
• A Must-Have Tool: Designed for voltage & polarity testing, continuity testing, signal circuit testing, supply power/activating components, trailer lights & connections testing. It features red/green polarity indicators, follows & locates short circuits, and checks bad Ground contacts.
  
• 4 Working Modes: DC Voltage mode for reading the DC voltage with a resolution of 0.1 volts; AC Voltage mode for reading the Max. voltage, the Min. voltage, and frequency; Resistance mode for reading the resistance between the tip and auxiliary ground lead; Diode mode for checking forward bias or reverse bias.
  
• Safety & Durable: An auto circuit breaker makes this tool very safe and sustainable and its short-circuit protection protects the device from overload. A quick self-test is a must before starting to test a circuit or component, which ensures your tool is in excellent condition.
  
• Friendly Design: A friendly navigate user menu makes it easier to operate, even a beginner without a manual. Built-in 2 headlights allow you to work in the dark area; an extra 20feet extension cord allows reaching wires in or out of the vehicle or some congested places; a rugged carry case to store the tool whenever.

More uses are worth your expectation!

• Find The Short Circuits: In most cases, a short circuit will appear as a blown fuse or a tripping of an electrical protection device. Use the probe tip to activate and energize each of the fuse contacts. The contact which trips the circuit breaker is the shorted circuit.
• Find The Bad Ground: Probe the suspected ground wire or contact with the probe tip. If the circuit breaker tripped, this circuit is more than likely a good ground.
• Testing Trailer Lights: While the tool in DC Voltage mode, clip the auxiliary ground lead to the trailer ground, probe the contacts at the jack and then apply voltage to the probe tip. This lets you check the function and orientation of the connector and trailer lights.
• Check Continuity: While the tool is in Resistance mode, using the probe tip with chassis is ground or the auxiliary ground lead, continuity can be tested on wires and components attached or disconnected from the vehicles electrical system.
• Activating Component: The component activation function is designed to generate activation signals to the tested components, such as activating lights, motors and other on-board electric equipment.
• Signal Circuit Testing: Once you extract a DTC from the vehicle and realize that troubleshooting begins with some kind of sensor circuit, there is a quick test you can perform to verify the code. Testing your sensor is easy while using the tool.
• Voltage & Polarity Testing: While the tool is in DC Voltage mode, contact the probe tip to a POSITIVE circuit. If contact the probe tip to an OPEN circuit, neither of the LED will light.

Two power supply methods: Powered by vehicle battery or cigarette lighter, compared with other circuit testers that only use car battery power, PB100 provides more choices and is more convenient to use.

More data than a test lights: Compared to the test light that only displays DC voltage, PB100 can also display AC voltage, resistance and diode.

More functions than a multimeter: Just choose the mode by pressing the mode button and then contact the probe tip to a circuit, the LCD will read the DC/AV voltage resistance.