ANTEC C2M CONSTELLATION | COMPACT MICRO-ATX | 270° 4MM TEMPERED GLASS | 240MM +120MM ARGB PWM FANS | USB TYPE-C 10GBPS | BLACKQUICK SPECS * Show off your build through 270° of full-view 4mm tempered glass * Cool hard with a pre-installed 240mm reverse ARGB fan plus a 120mm rear ARGB fan * Fit graphics cards up to 415mm and 360mm top radiators in a compact frame * Build tool-free with clip-on front, side and top panels * Connect fast through front USB Type-C 3.2 Gen 2 (10Gbps)A 270° VIEW OF YOUR BUILDThe C2M Constellation wraps the front and left side in 4mm tempered glass for a270° pillar-less, full-view display. With no corner post breaking the line ofsight, your motherboard, graphics card and ARGB lighting are all on show aclean, transparent look that turns a compact Micro-ATX build into a centrepiece.MASSIVE AIRFLOW IN A COMPACT FRAMEMesh top, bottom and side panels let air move freely through the chassis, whilea ventilated PSU shroud grille boosts vertical airflow for cooler, more stabletemperatures. Removable top and bottom dust filters keep the interior clean andare quick to pull out and rinse, so the airflow advantage lasts.SERIOUS COOLING HEADROOMThe C2M ships ready to run, with a 240mm reverse single-frame ARGB PWM fan onthe right side and a 120mm ARGB PWM fan at the rear pushing up to 114.33 CFMat 8001500 RPM while staying quiet at 30.4 dB(A). There's room for up to six120mm fans in total, plus a 360mm top radiator and a 240mm side radiator, soboth air and liquid builds have space to breathe. Graphics cards up to 415mm andCPU coolers up to 165mm fit comfortably GPU clearance drops below 280mm when aside radiator is fitted.TOOL-FREE BUILDING AND TIDY CABLE ROUTINGClip-on front, side and top panels use fixing slots and studs, so they come offand back on without tools for hassle-free installation and cleaning. Behind themotherboard tray you get 30mm of cable-routing clearance and three Velcro strapsto keep wiring neat, while the front I/O set low for desktop placement putsUSB 3.0, USB Type-C 3.2 Gen 2 (10Gbps) and a headphone/mic combo jack withineasy reach.FEATURES: * Compact Micro-ATX chassis supporting Micro-ATX and ITX motherboards * 270° full-view design with 4mm tempered glass across the front and left side * Pre-installed 1 x 240mm reverse single-frame ARGB PWM fan (right side) and 1 x 120mm ARGB PWM fan (rear) * Mesh top, bottom and side panels with a ventilated PSU shroud for high airflow * Supports up to six 120mm fans top 3 x 120mm or 2 x 140mm, side 2 x 120mm, rear 1 x 120mm * Radiator support: 360mm top, 240mm side, 120mm rear * Fits graphics cards up to 415mm (under 280mm with a side radiator) and CPU coolers up to 165mm * Tool-free clip-on front, side and top panels * Removable top and bottom dust filters * 30mm cable-routing clearance with three Velcro straps * Front I/O with USB 3.0, USB Type-C 3.2 Gen 2 (10Gbps) and headphone/mic combo jackSPECIFICATIONS: * Form Factor: Compact Micro-ATX * Motherboard Support: Micro-ATX, ITX * Case Material: Steel, plastic and 4mm tempered glass * Side Window: 4mm tempered glass * Front I/O: Power, USB 3.0 x1, USB Type-C 3.2 Gen 2 (10Gbps) x1, Headphone/Mic Combo Jack * Expansion Slots: 5 * Drive Bays: 1 x 3.5", 1 x 2.5" * Fan Support: * Top: 3 x 120mm / 2 x 140mm * Side: 2 x 120mm * Rear: 1 x 120mm * Included Fans: 1 x 240mm reverse single-frame ARGB PWM (right side), 1 x 120mm ARGB PWM (rear) * Included Fan Performance: up to 114.33 CFM, 8001500 RPM, 30.4 dB(A) * Radiator Support: * Top: 120 / 240 / 360mm * Side: 120 / 240mm * Rear: 120mm * Max GPU Length: 415mm (
