Anycubic Pla Silk Dual Filament – Black Green

Anycubic Pla Silk Dual Filament Black Green

Silk-lustre dual-colour PLA filament | Striking Black Green gradient finish | Adjustable gloss via temperature and speed | Compatible with 0.4 mm+ nozzles | 1 kg spool The Anycubic PLA Silk Dual Filament in Black Green is designed for makers and hobbyists who want their prints to stand out with a rich, layered aesthetic. Combining deep black and bold green in a single strand, this dual-colour silk PLA produces a flowing gradient effect that shifts and catches the light from every angle, giving decorative prints, fan art, and artworks a premium, polished look. You can fine-tune the surface finish simply by adjusting your nozzle temperature and print speed a higher temperature or slower speed delivers a high-gloss silky surface, while cooler, faster settings yield a subtler sheen. Compatible with any FDM printer using a 0.4 mm or larger nozzle, it runs cleanly at 210240 °C with a heated bed set between 55 and 56 °C, and prints reliably at speeds from 50 up to 250 mm/s. Dry the filament at 5565 °C for 68 hours before use for best results. Features Black Greencolour blend produces a lustrous, metallic silk finish 1kg spool for extended printing sessions and larger projects PLA-based material easy to print and widely compatible with FDM printers Intelligent identification chip compatible with Anycubic ACE Pro for automatic filament recognition Resilient and flexible tested to resist breakage during feeding and multi-colour operation Prints at 210240 °C nozzle temperature; heated bed at 5556 °C Recommended print speed: 50250 mm/s Reusable filament spool with threaded locking system to reduce entanglement Specifications Colour: Black Green Package Weight: 1 kg Dry Out Before Use: Recommended Drying Condition: 55-65, 6-8h ACE Compatibility: Compatible Nozzle Size: Recommended 0.4 mm or above Printing Temperature: 210-240 Heated Bed Temperature: 55-56 Recommended Printing Speed: 50-250 mm/s Maximum Volume Speed (Flow Rate): 8 mm³/s Density: 1.22 g/cm³ Melt Index: 9±1 g/10 min (190/2.16kg) Melting Point Temperature: 164 Vicat Softening Temperature: 54 Heat Deflection Temperature (0.45MPa): 53 Young's Modulus: 2000±200 MPa Tensile Strength: 37±4 MPa Elongation at Break: 28±5% Bending Modulus: 2400±160 MPa Bending Strength: 66±4 MPa lzod lmpact Strength (X-Y): 20±2 kJ/m² Tensile Strength (Z): 12±4 MPa Filament Type: Aesthetic filaments Recommend to Print: Decorative parts, fandom, artworks Intelligent Identification: Supported Reusable Filament Spool: Supported What's in the Box Anycubic PLA Silk Dual Filament Black Green x1

• Brand: Anycubic
• Category: 3D Printing > 3D Printer Materials