Anycubic Water Wash Resin 2.0 – Black

Water-washable UV resin | Compatible with 365405 nm MSLA/LCD printers | Black finish for detailed prints | Rinse clean with water no harsh solvents needed

The ANYCUBIC Water Wash Resin 2.0 Black is designed for MSLA/LCD resin printers and makers who want high-detail results without the hassle of solvent-based cleaning. Its hydrophilic group-modified formulation means printed parts can be rinsed clean with plain water (5 minutes), cutting out the need for isopropyl alcohol in the wash stage. Compatible with 365405 nm UV light sources, it suits a wide range of consumer resin printers. Once washed, a 3-minute post-cure at 405 nm locks in the mechanical properties tensile strength of 3843 MPa and hardness of 8285 HD delivering finished parts that are firm and dimensionally stable. Best printed in an ambient temperature of 2040 °C for consistent layer adhesion and reliable results.

Features

• Water-washable formula rinse printed parts with water (5 min), no IPA required during washing
• Compatible with 365405 nm MSLA/LCD resin printers
• Black colour for display models, miniatures, and detail-focused prints
• Cured hardness of 8285 HD with tensile strength of 3843 MPa
• Low volume shrinkage rate of 2.25.5% for dimensionally accurate output
• Post-cure in 3 minutes at 405 nm UV (25,00030,000 µW/cm²)
• Post-cured resin disposable as standard plastic waste

Specifications

• Colour: Black (#212721)
• Resin Size: 1kg
• Pre-print preparation: Shake well before use
• Print environment: 20-40
• First layer exposure duration: 25-40 s
• Normal exposure duration: 2-2.5 s
• Print temperature: 20-50
• Material: Hydrophilic group-modified light-curing resin
• Wavelength: 365-405 nm
• Viscosity: 190-230/mPa·s(25)
• Density: 1.07-1.09/g/cm³
• Hardness: 82-85 HD
• Tensile Strength: 38-43 MPa
• Elongation at Break: 16-22%
• Bending Modulus: 48-60 MPa
• Bending Strength: 2300-3000 MPa
• Young's Modulus: 1100-1300 MPa
• Izod Impact Strength: 133 J/m
• Volume Shrinkage Rate: 2.2-5.5%
• Cleaning: 95% IPA
• Washing duration: 3 mins
• UV Wavelength: 405 nm
• Curing Temperature: 18-30
• UV Intensity: 25000-30000 uW/cm²
• Curing time: 3 mins
• Disposal: Post-UV-curing resin is treated as plastic waste
• Cleaning: Water
• Washing duration: Medium 5 min
• UV Wavelength: 405 nm
• Curing Temperature: 18-30
• UV Intensity: 25000-30000 uW/cm²
• Curing time: 3 mins
• Disposal:
  • 1. Do not drain wastewater into sewers to avoid contaminating groundwater.
  • 2. After cleaning, let the wastewater sit in the tank for a period of time.
  • 3. Place it under sunlight to allow the resin in the tank to fully cure.
  • 4. Once cured, dispose of it as solid plastic waste for recycling to prevent environmental pollution.

What's in the Box

• Anycubic Water Wash Resin 2.0 Black x1