AQUA MAX - POOL PUMP

AQUA MAX - POOL PUMP

New 30 available
R3,150.00
Shipping
R35.00 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30.00 surcharge. This will be calculated at checkout if applicable.
Check my rate
The seller allows collection for this item. Buyers will receive the collection address and time once the order is ready.
The seller has indicated that they will usually have this item ready to ship within 2 business days. Shipping time depends on your delivery address. The most accurate delivery time will be calculated at checkout, but in general, the following shipping times apply:
 
Standard Delivery
Main centres:  1-3 business days
Regional areas: 3-4 business days
Remote areas: 3-5 business days
Seller
Buyer protection
Get it now, pay later

Product details

Condition
New
Location
South Africa
Product code
9022423
Bob Shop ID
654298686

Your Guide to a Perfect & Warranty-Protected Aquamax Installation

Headline: Maximize Your Investment: Expert Installation for Years of Carefree Swimming

Congratulations on choosing Aquamax for unparalleled pool clarity and performance. Proper installation isn't just a recommendationit's the key to unlocking decades of reliable, trouble-free operation and protecting your warranty.

To ensure your complete peace of mind, we strongly recommend professional installation by a qualified pool technician or electrician. They will handle the critical details below, guaranteeing your system performs at its best from day one.

Key Installation Best Practices (For Your Installer)

A correct installation ensures maximum efficiency, longevity, and validates your product warranty. Please ensure your installer reviews these critical points:

1. Piping for Peak Performance

  • Pipe Size: Use suction and discharge pipes with a diameter equal to or greater than the pump's connections (e.g., 63mm suction/50mm outlet for 1.1kW & 1.5kW models).

  • Unions are Essential: Install suitable unions adjacent to the pump for easy future service and removal.

  • Watertight Seals: Use a proper pipe jointing compound on all connections to prevent air leaks, which drastically reduce performance.

  • Support & Positioning: Never support pipework on the pump, or vice versa. Position the pump on a flat, level surface safe from flooding.

2. Positioning & Ventilation: Protect Your Motor

  • Height & Distance: For optimal priming and performance, install the pump no more than 300mm above the pool water level and keep suction lines as short as possible.

  • Cooling Clearance: Crucial: Maintain a minimum 150mm clearance behind the motor's fan cowling. Obstructions cause overheating, leading to premature failure and voided warranty.

  • Ventilation: The pump must operate in a well-ventilated area. Enclosed spaces must have ventilation holes or remain open during operation.

3. Electrical & Drainage: Safety First!

  • Qualified Electricians Only: All electrical connections must be performed by a qualified professional.

  • Cable Upgrade: The supplied cable is for testing only. It must be replaced with a permanently installed, suitably rated cable (Min. spec: 60245IEC66 (HO7RN-F)).

  • Prevent Flooding: Ensure your pump house has adequate drainage. Motor failure due to flooding is not covered under warranty.

Protecting Your Warranty: A Quick Guide

Your Aquamax product is protected by a 24-month warranty against defects in materials and workmanship.

To keep your warranty valid, please note:

  • Professional Installation is Key. Failure to follow installation guidelines voids warranty.

  • Flood Damage is Excluded. Motor failure from water ingress (rain, flooding) is not covered.

  • Protect Against Load Shedding: We strongly recommend installing a surge protector. Electrical components damaged by power surges are not covered unless a protector is installed.

  • Keep Your Receipt: Your dated proof of purchase is required for all warranty claims.

Our Promise: Should a defect arise, Aquamax will repair or, at our discretion, replace the product or issue a credit. This warranty covers the product only, not installation or labor costs.

[Click Here to Find a Qualified Aquamax Installer Near You]

Maintaining Your Crystal-Clear Water

A little care ensures a long life for your pump.

  • Regularly clean the pump leaf basket and pool skimmer.

  • Backwash your filter weekly or when pressure rises 50% above starting pressure.

  • Never run the pump dry or with closed valves.

  • Keep the motor free of dust and debris.

  • Annual Service: Replace the lid O-Ring every year using only silicone-based lubricant (never petroleum jelly).

Quick Troubleshooting Tips

  • Pump won't start? Check power supply and reset the thermal overload button.

  • Poor water flow? Check for prime, clean the leaf trap, and ensure no valves are closed.

  • See air bubbles? Check the leaf trap lid is sealed tightly.

  • Unusual noise? Clean the leaf trap; persistent noise may indicate a bearing issue.

  • Water leak from the seal plate? The mechanical seal may need replacement.

We're Here to Help
For detailed troubleshooting, warranty claims, or to speak with an expert, please contact your authorized Aquamax distributor or your point of purchase.

Thank you for trusting Aquamax. Here's to years of sparkling, carefree swimming!

Add to cart

Similar products

AQUA MAX - PUMP CASING
New
R750.00
23% OFF
AQUA MAX POOL PUMP 0.6kw
New
R2,378.99 R3,099.99
20% OFF
POOL SAND FILTER AQUA MAX 2 BAG (BLACK)
New
R3,199.99 R3,999.99
22% OFF
AQUA MAX S POOL PUMP 0.60kw
New
R2,488.99 R3,199.99