| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
1. RFID Access Control Kit
RC522 RFID Reader Module: The blue rectangular board with the circular antenna traces. Used to read contactless RFID tags.
RFID Key Fob: The blue teardrop-shaped keychain tag.
RFID Card: The white, credit-card-sized plastic card.
Header Pins: The two small strips of black and silver pins next to the RFID board (used for soldering onto the module).
2. Displays
1602 LCD Display: The long green board with the black screen block. It can display 16 characters across 2 lines.
4-Digit 7-Segment Display: The small blue module with four digital number slots (commonly used for clocks or timers).
8x8 LED Dot Matrix: The square black component with a grid of 64 tiny circular LEDs.
3. Prototyping Essentials
Half-Size Breadboard: The white rectangular grid block. Used to build and test circuits without soldering.
Male Header Pins: The long single strip of pins below the breadboard. Can be broken into smaller pieces as needed.
Jumper Wires (Ribbon): The large multi-colored bundle at the very bottom, along with the smaller 3-wire strand higher up. These are used to connect components together.
4. Control & Infrared
IR Remote Control: The slim silver and black remote.
IR Receiver Module: The tiny circuit board to the right of the remote with a small silver bulb. It receives the infrared signals from the remote.
5. Main Microcontroller & Case
Arduino Uno R3: The main blue microcontroller board. This is the "brain" that you program to control all the other components.
Protective Enclosure: The black plastic case next to the Arduino board, used to mount and protect the Uno.
