| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Features
What's in the box?
1 x Argon Poly+ 5 red and black case
1 x 30mm PWM fan with Pi 5 header and 2 mounting screws
1 x Black heatsink 19mm x 14mm x 7mm
1 x mini screwdriver
Note: This case has enough space if you rather want to fit the Raspberry Pi Active Cooler (not included) as per below pic.
Resources
Opening the red case top
The red cover slides about 1/2cm away from the USB ports and can then be lifted up.
Fan installation
The label on the fan should be facing you when mounting it to the case top. You will need to apply pressure on the screws when mounting the fan so that they can create a unique thread to hold the fan in place.
Raspberry Pi 5 board installation
To fit your Raspberry Pi into the Poly+ case, there will be plastic tabs on either side of the black rood piece labelled "Poly+" that you need to remove by squeezing both sides together. The Pi can then be inserted, with the Poly+ roof being clipped back into place over the USB ports
Note: Stock is currently available in South Africa for national shipping!
