ATU100 1.8-55Mhz Automatic Shortwave Antenna Tuner USB Type-C Rechargeable with 0.96inch OLED Displa
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 15 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Returns
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Bob Shop ID
615177117
The shortwave automatic antenna tuner contains a set of 7 capacitors and 7 inductors, which allows it (with the largest configuration) to work effectively in a wide frequency band, overlapping the amateur radio HF band of 1.8-55MHz. Built-in lithium battery, 4.2V, 600mAh, you can use Type-C? cable to recharge it. Equipped with 0.96inch OLED display, you can see the data clearly. Automatically tuned and do not need control wires, suitable for most radio stations. You can have a try.
Features:
The shortwave automatic antenna tuner contains a set of 7 capacitors and 7 inductors, which allows it (with the largest configuration) to work effectively in a wide frequency band, overlapping the amateur radio HF band of 1.8-55MHz. Made of quality material, wear resistance, with stable and reliable performance. Built-in lithium battery, 4.2V, 600mAh, you can use Type-C? cable to recharge it. Equipped with 0.96inch OLED display, you can see the data clearly. Automatically tuned and do not need control wires, suitable for most radio stations. One button to on/off, easy to use very convenient. Equipped with indicator light, it will turn on while recharging.
Instructions:
Connect the radio, ATU antenna tuner and antenna. For the first use, please set the output power of the radio or power amplifier between 20-30W, or the high-power tuning can easily damage the antenna tuner. Set the radio mode, use FM mode. Choose the antenna band to use, use 20-30W power in FM mode, press the radio PTT, observe the PWR and SWR of ATU antenna tuner. ATU button TUNE use: short press (less than 1 second) ATU button, it is in reset state, long press (more than 1 second) ATU button is in tuning state. If the SWR display of the ATU antenna tuner in the transmitting state is ???2.0, it means that the antenna is detuned.
Specifications:
Name: ATU100 Tuner Material: metal Color: black Display: 0.96inch OLED display Charge: USB Type-C cable Battery: 1 * lithium battery, 4.2V, 600mAh (included) Working frequency: 1.8-55MHz Maximum current consumption: 400mA Maximum working power: 100W Maximum possible measurement power: 150W Minimum power required to starts tuning: 5W Minimum possible measurement power: 0.1W Measurement step for power up to 10W: 0.1W Measurement step with power higher than 10W: 1W Power measurement accuracy: 10% Maximum installation inductance: 8.53uH Minimum installation inductance step length: 0.05uH Maximum installation capacitance: 1869pF Minimum installation capacitance step length: 10pF Item size: 150 * 88 * 38mm / 5.91 * 3.46 * 1.50in Item weight: 300g / 10.58ounce Package size: 200 * 120 * 50mm / 7.87 * 4.72 * 1.97in Package weight: 400g / 14.11ounce
Packing List:
1 * ATU100 Tuner
Details Pictures:
Features:
The shortwave automatic antenna tuner contains a set of 7 capacitors and 7 inductors, which allows it (with the largest configuration) to work effectively in a wide frequency band, overlapping the amateur radio HF band of 1.8-55MHz. Made of quality material, wear resistance, with stable and reliable performance. Built-in lithium battery, 4.2V, 600mAh, you can use Type-C? cable to recharge it. Equipped with 0.96inch OLED display, you can see the data clearly. Automatically tuned and do not need control wires, suitable for most radio stations. One button to on/off, easy to use very convenient. Equipped with indicator light, it will turn on while recharging.
Instructions:
Connect the radio, ATU antenna tuner and antenna. For the first use, please set the output power of the radio or power amplifier between 20-30W, or the high-power tuning can easily damage the antenna tuner. Set the radio mode, use FM mode. Choose the antenna band to use, use 20-30W power in FM mode, press the radio PTT, observe the PWR and SWR of ATU antenna tuner. ATU button TUNE use: short press (less than 1 second) ATU button, it is in reset state, long press (more than 1 second) ATU button is in tuning state. If the SWR display of the ATU antenna tuner in the transmitting state is ???2.0, it means that the antenna is detuned.
Specifications:
Name: ATU100 Tuner Material: metal Color: black Display: 0.96inch OLED display Charge: USB Type-C cable Battery: 1 * lithium battery, 4.2V, 600mAh (included) Working frequency: 1.8-55MHz Maximum current consumption: 400mA Maximum working power: 100W Maximum possible measurement power: 150W Minimum power required to starts tuning: 5W Minimum possible measurement power: 0.1W Measurement step for power up to 10W: 0.1W Measurement step with power higher than 10W: 1W Power measurement accuracy: 10% Maximum installation inductance: 8.53uH Minimum installation inductance step length: 0.05uH Maximum installation capacitance: 1869pF Minimum installation capacitance step length: 10pF Item size: 150 * 88 * 38mm / 5.91 * 3.46 * 1.50in Item weight: 300g / 10.58ounce Package size: 200 * 120 * 50mm / 7.87 * 4.72 * 1.97in Package weight: 400g / 14.11ounce
Packing List:
1 * ATU100 Tuner
Details Pictures:
