Autel G-Box 2 Key Programming Adapter for Mercedes Benz & BMW Vehicles Addon for Autel MaxiIM IM508 With XP400, IM608 & IM608 Pro

The Autel G-BOX2 is an adapter compatible with Autel's IM508 (with purchase of XP400 programmer) and IM608, IM608 Pro Key Programming tablets used to aide in the programming keys for Mercedes DAS3 CAN EIS/EXS in an ALL-Keys Lost situation. The G-Box2 also supports DME/DDE ISN Reading and Writing in Boot Mode on applicable BMW vehicles. Bench Method is also supported. All Keys Lost password calculations are 4x to 8x faster. Moreover, the number of insertions and removals of W216 and W164 EISs after the year 2009 is reduced to zero, greatly simplifying the operation steps. It can be used in Boot Mode or Bench Method. G-BOX2 needs to be used with the Autel IM508 with XP400 or IM608, IM608 Pro.

Autel G-Box2:

• The G-BOX2 realizes fast mode on vehicle and bench when all keys of Mercedes-Benz vehicles using the DAS3 EIS/EZS are lost. The use of the G-BOX2 reduces the time needed and eliminates the process of insertion and removal.
• The G-BOX2 can read and access most engines manufactured by Bosch including EDS/ MEx17 series engines used in BMW and Volkswagen Vehicles. This capability supports the ability to perform adaptions when all keys are lost and engine is replaced.
• The G-BOX2 is compatible with the Autel's advanced diagnostic tablets support IMMO and key programming functions.

Why buy Autel G-BOX2?

1. AUTEL G-BOX Adapter Support Mercedes All Key Lost BMW DME Reading.
2. Reads and writes Bosch engine ECU on F classis of BMW and MQB of Volkswagen.
   
3. AUTEL G-BOX Adapter use with the Autel MaxiIM IM608, IM608 Pro, IM508 With XP400 and Auro IM600.
4. Autel G-Box Adapter can work on Mercedes-Benz vehicles with DAS3 CAN EIS/EZS in AKL.
5. With the Autel Advanced Diagnostic Tablets supporting IMMO and Key Programming functions.
6. Autel G-Box Adapter is specially designed for Mercedes-Benz vehicles with DAS3 CAN EIS/EZS in AKL.
7. Supports fast mode on vehicle and bench when all keys of Mercedes-Benz vehicles using the Das3 EIS/EZS are lost.
8. Compare with other adapter Autel G-Box Adapter is more effective to reading the ECU data from W204 and W207 EISs.

Main Features:

1. Mercedes DAS3 can EIS / EZS all keys lost.
2. Work with Autel MaxiIM IM608, IM608 Pro or IM508 with XP400.
3. Can read and write BMW DME / DDE ISN in boot mode.
4. BMW DME / DDE ISN reading and writing in boot mode.
5. Mercedes Benz All Keys Lost, Faster Password Calculation.
6. Also compatible with Auro IM600 and Auro IM100 with XP400.
7. Supports Mercedes Benz All Keys Lost, faster calculate password.
8. Used for Faster Mercedes ECU data and EIS password calculation.
9. No need to remove and reinsert the key for W221 & W164 after 2009 models.
10. It helps to reduce the time for reading the ECU data from W204 and W207 EISs by over 85%.

Comparison Between G-BOX1 & G-BOX2:

• 1. Mercedes DAS3 add keys and all keys lost on bench. (both)
• 2. Mercedes DAS3 all keys lost on vehicle. (both)
• 3. Read engine control module password by boot. (both)
• 4. Read Bosch ME/MED/MEVD/EDC 17 Engine control module password on the bench. (G-BOX2 only)

How does Autel G-Box Work?

OBDII Operation When All Keys of Mercedes-Benz Vehicle Are Lost. (This method is suitable for Mercedes-Benz W204 , W207, W216 and W164 EISs after the year 2009)

1. Connect the G-Box to vehicle's OBDII.
2. Remove the fuse of vehicle EIS, Connect the Relay ports to the fuse using the supplied fuse cable.
3. When the vehicle has an ELV, connect the K7 port and ELV plug using the supplied K-line cable.
4. Connect the G-Box to the Autel Diagnostic Tablet.
   

Desktop Operation When All Keys of Mercedes-Benz Vehicle are Lost. (This Method is suitable for all Mercedes-Benz EISs that are already supported by Autel Diagnostic Tablet.)

1. Connect G-Box to the Mercedes-Benz EIS using the supplied DB15 Cable.
2. Connect to the DC port of G-Box using a power adapter (DV 12V)
3. Connect G-Box to the Autel Diagnostic Tablet.
   

Connection Steps:

1. Connect the G-BOX2 to the for Mercedes-Benz EIS using the supplied DB15cable.
2. Connect to the DC Port of G-BOX2 using a power adapter (DC 12V)
3. Connect the G-BOX2 to the Autel Diagnostic Tablet.
   

3. Reading Engine Password Operation on Bench: Use this method for Bosxx ECUs supported by Autel Diagnostic Tablets supporting IMMO and Key Programming Functions?