The MaxiScan VAG405 Scanner is an OEM level diagnostic tool compatible with OBD2, CAN-BUS & VW / Audi vehicles sold worldwide. By simply plugging it into your vehicles diagnostic socket, you will be able to Read & Erase trouble codes. Advanced features for VW, Audi, Seat & Skoda vehicles like Reseting service lights. Works on engine, ABS, Airbags, transmission, radio, climate control, instruments, immobilizer & more.
This scanner will work on all makes and models that are OBD compliant that vitually all cars from 2000 onwards!
2 IN 1 SCANNER READS ALL FAULTS ON VW AUDI SEAT SKODA AND ALL OTHER MAKES AND MODELS IT WILL READ ENGINE FAULTS ON VOLKSWAGON AUDI SEAT AND SKODA IT HAS FULL FUNCTIONS IT WILL DO ABS AIRBAGS IMMO ETC AND WILL WORK ON ANY CAR 96 ONWARDS THAT HAS AN OBD PLUG WHICH MOST HAVE!
ON ALL OTHER MAKES AND MODELS PUEGEOT RENAULT CITREON BMW MERCEDES ETC IT WILL ONLY READ THE ENGINE FAULT CODES AND WILL WORK ON MOST MODELS 2000 ONWARDS!
VERY easy to use plug in check and clear faults easily save a fortune in garage bills only 4 buttons up down yes and no you cant go wrong!
Perfect for a Garage or Home use
- Works with Volkswagen and Audi(Audi/Seat/Skoda/Jetta/Golf/Beetle/Touareg/GTI/ Passat and more) sold worldwide since 1990
- Reads and erases Diagnostic Trouble Codes (DTCs) of most electronically controlled vehicle modules, including Engine, ABS, Airbags, Transmission, Radio, Climate Control(A/C), Cent.Elect. Steering Wheel, Instruments, Immobilizer, etc.
- Reads and clears generic trouble codes of cars using ISO 9141-2 ("CARB"), ISO 14230 ("KWP-2000") and ISO-15765 ("CAN") protocols.
- Turns off MIL lights of engine, airbags, ABS , A/T and most other systems
- C.A.N.(Controller Area Network) Capability
- Resets oil service light
- Retrieves vehicle information (VIN)
- Displays I/M Readiness Status.
- Displays DTC definitions on Unit Screen
- Highly reliable and accurate
- Easy to use with friendly interface
- Safely communicates with the on-board computers
- Large, easy-to-read backlit LCD
- Stand-alone unit with no need for an additional laptop computer to operate.
- This Tool performs as FULL diagnostic tool for VAG range and as Generic Fault Code Reader for other Vehicles that are OBD2 complient..
This cable can not work if your car uses a protocol/bussystem like VPW, PWM or CAN-bus
USB Description:
Workable Model
This diagnostic cable is usable for ISO9141 and KWP2000 transmission protocol like used for example by:
Volkswagen
Audi
Skoda
Seat
Reference Data
1.This cable can not work if your car uses a protocol/bussystem like VPW, PWM or CAN-bus.
2. Terminal K = Bus of communication
3. Terminal L = Ignition for waking up car computing system (ECU: Engine Control Unit)
4. Existed 3 different protocols with same OBD2 connector incl. ISO/KWP, VPW, PMW
5. This K/L Diagnostic interface & cables work on ISO/KWP (Key Word Protocol) launched after 1996 only.
6. Supported also ISO9141 protocol
7.The Cables may work with some versions of the Carsoft, but carsoft used a lot of different interfaces during the different versions and also had some custom interfaces.
Software CD:
Applications to Read & erase error code, log data e.g., speed, gasoline-consume, engine-rotating (RPM: Rotation Per Minutes)
