NB - WARRANTY INFORMATION (BELOW DOES NOT APPLY IF YOU UPGRADE TO LITHIUM BATTERIES ABOVE)
The standard batteries in this kit are rated to last 150-200 cycles (load sheddings).
During occasional load shedding, at stage 1-2, the average life span is 2 years.
Unfortunately, during constant load shedding, at stage 2 - 6, these cycles will be depleted within a few months.
The batteries will also be further degraded due to insufficient time to recharge fully in between load shedding cycles.
**Please note that as soon as the batteries stop lasting, unfortunately the warranty becomes void, as this means that the batteries have depleted their cycles and reached the end of their life.
Please always keep the total load shedding count of 150-200 cycles (high cycle batteries) or 200-250 cycles (deep cycle batteries) in mind when running the system.
Therefore, during constant stage 2-6, we highly recommend keeping the inverter's power switch OFF. Then, only switch it on when the need for backup power is crucial.
This will preserve the longevity of the batteries (please keep it plugged in to the wall permanently to keep it charged).
Note: Fan comes on during charging and load shedding. Once batteries are fully charged, unit is SILENT
- To download the Inverter Manual Click Here
- To download the Battery Care Instructions Click Here
- Are you in the dark during load shedding?
- Does your favourite program stop recording on your PVR?
- Do you need to catch up work on your computer?
- Does your phone run flat when you need it the most?
You need an inverter system. See below Frequently Asked Questions on how they work:
Q) What is an inverter system and what does it do do?
It is an inverter unit coupled with a battery which provides power when there is load shedding. It keeps its battery charged when there is Eskom power. As soon as Eskom power cuts, the system instantly transfers over to battery power so you can keep your lights, TV, computers, chargers and wifi running during load shedding
Q) Is it easy to connect up? Do I have to fiddle with electronics?
It is super easy The system is plug and play.
The inverter has a regular 3 pin plug that goes into the wall. You then have a 3 way multiplug on the inverter that allows you to connect any appliance you want. Keep the appliances connected at all times, the inverter will automatically switch to battery as soon as it detects Eskom power is down.
Q) How much backup time will I have on the unit before normal Eskom power come back on to recharge the battery?
Assume a computer, TV, and desk lamp are connected to the inverter:
This unit will last 4-6 hours
Only want a lamp, wifi router and laptop connected to the inverter:
This unit will last 10-12 hours
Q) What appliances can I run on the inverter system?
This unit is PURE SINE WAVE (same electricity signal that comes from Eskom), so can run any appliance as long as the total load is less than 3000W
Q) Can I connect the inverter to my house's DB (electric) board so that my whole house is powered when Eskom does load shedding?
Sure you can - You will just need an electrician to wire it correctly into your DB board.
Q) What is the warranty/guarantee?
The entire system comes with a full 1 year warranty.
Kit Includes:
- 1x GeeWiz Axpert Type 3000VA (3000W) PURE Sine Wave Inverter - PS3K-PLUS (50A PWM Solar Controller)
- 2x Enertec / Energizer / Royal / Deltec / Vision 100Ah 12V Batteries
- 1x Steel Battery Case
2x 100AH BATTERIES INCLUDED
Unit Dimensions: 50cm(H) x 39cm(W) x 38cm(L)
The batteries in this unit are designed for backup use only - not for daily SOLAR OFF-GRID charging/discharging
*Owing to the weight of this item , there will be an additional R795 courier charge.
*Please note - depending on stock availability, cabinet design may vary slightly from the image
*Additionally, please allow an extra 2-3 days for courier as this item is sent with road freight
*PLEASE NOTE- If COLLECTION is selected, there is no additional charge, but unit will not come with pallet packaging for couriers
Here's how to maximize your inverter's battery life
Please leave your inverter kit plugged in and turned on. It will keep your batteries at constant full charge — this is the best state to keep them in.
If there is no load shedding, after a few weeks, the acid will start to sulphate on the top of the battery, so please do the following: Once every 1-2 months, please unplug the inverter from the wall and let it run until the inverter starts beeping, then immediately plug it back in. This will circulate the acid and will tremendously increase the cycle life of your batteries.
Please note:
White polystyrene is there to keep the batteries from moving around, it does not have to be removed and is 100% safe!
