Titanium Alloy Probe for Precise Test

Calibrate with Any Known PH Liquid

Easy to Read in the Dark

PH2011-ATC digital PH tester is the latest model with ATC and backlight display upgraded, the new NTC sensor which is made of temperature inductive Titanium alloy provides quicker and more accurate ATC (Image 2 above) while in some other manufacturers' products the plastics were used. ATC, automatic temperature compensation, adjusts the PH value difference caused by the change of temperature. 

Specifications:

• PH testing range: 0.00 to 14.00
• Resolution: 0.01 pH
• Accuracy: +/- 0.01 pH (20 degree)
• Working temperature: 0 to 50 degree
• Weight: 53 grams
• Dimensions: 151 mm x 33 mm x 20 mm

This digital PH meter package includes:

• One meter device with 4 batteries (AG13/LR44).
• One screw driver for easy calibration.
• One manual.
• Two sachets of PH buffer powder (Default pH4.01 and pH6.86, or pH6.86 and pH9.18 if required.)
• One plastic box

Remarks:

• ATC, automatic temperature compensation, to revise the error caused by change of temperature. 
• The ATC probe is made of Titanium Alloy to improve the accuracy, unlike others made of plastics.
• The PH meter used to test the PH of the fish pond water shown in the above images is NOT this listed one.
• The images of PH testing examples show how important it's to test PH of the water in seller's koi ponds.

Importance:

1. The glass electrode is fragile, avoid to be touched or hit, always keep the cap closed while not using, no guarantee for its damage. When the new device is received, the cap may be stuck by chemicals which was not cleaned after the calibration by manufacturer, please pull out forcefully, do not bend or turn the cap, this may be done easily after dipping in the water for a while.
2. The device is pre-calibrated by the manufacturer, not necessary to calibrate it before using, but may be done if not correct.
3. The calibration is recommended, after 2 to 3 months if the testing has not be done too often, or the accuracy required.
4. Calibrate the tester with PH 6.86 buffer powder firstly, then the PH 4.01 or PH 9.18 ones. Should the sample to be tested be acidic, the tester can be calibrated with buffer powder of PH 4.01 and 6.86, while it's alkaline, PH 6.86 and 9.18 ones should be used for calibration. Calibration with these three types of buffer powder is recommended if the tester will be used to test the PH of acid and alkaline.
5. Maintenance, should the device not be used for a long period, simply test it with the clean water every half month.
6. Sway the  device gently against the tested liquid while testing (this may take a while), after the reading is unchanged, then stop and take the reading.
7. When replacing the batteries, remove (pull) the battery cap slowly and carefully as there are wires connecting to the cap.
8. The pH of tested liquid should be within pH 0 to 14 and its temperature also in 0 to 50 degree, otherwise the detection bulb may be broken if to test the liquid out of these ranges.
9. Cautions: Should the batteries are flat (working but reading unclear), the calibration may not be done correctly (error occurs), replace the batteries for calibration.

Optional Purchase

Spare LR44/AG13 button batteries (4 needed for this device) and additional sachets of buffer powder are available to buy while checking out without extra shipping cost if needed. 

Please visit our selling list to buy any quantities of Buffer Powder, spare AG13/LR44 button batteries or other types of pH testing pens, "Add to cart" works for the different small items you purchase from us to be checked out in one order with no extra shipping cost.

This PH tester can be used to test PH for cold drink and juice, watered chemicals and pharmaceuticals, swimming pool and tap water, etc. Calibration should be done regularly while testing in the labs and accuracy required.

SPECIAL DELIVERY - For buyers not be able to receive parcels in physical addresses but want to collect from their nearest pepstores (PAXI), PUDO lockers or Postnet Office

1. While checking-out in Shipping, select Collect from Beyers Park, Boksburg.

2. Write in Optional note to seller (just below shipping options) with PAXI codes, PUDO locker name or Postnet Office name.

3. Pay extra amount of R40 (for PAXI), R35 (for PUDO) or R90 (for Postnet), added to the total of checkout amount, to BOB.

4. Free shipping if 3 or more separate items of listing taken in one order done by "Add to cart", just pay BOB the checkout amount.

5. No actual collection will be done from seller's address.