BARREL AND STOCK SLING SWIVEL HARDWARE

Sling Swivels

A set of 2 swivels. One swivel with a barrel clamp that wil fit 16mm barrels. The other swivel has a wood screw for the stock - this you'll have to install by way of drilling a pilot hole, applying epoxy that can bond steel to wood or polymer (you'll need to remove the anti-corrosion finish of the coarse threading first. Apply epoxy on both substrates w/in one hour of exposing the raw material. Wipe off the excess epoxy w/ a dry cloth and work in a well-ventilated area, as epoxy produces harmful gasses. Leave it to cure for 48 hours before using. Also, we recommend using a jig or measurement tape to work perfectly centre on the stock -- Measure twice, cut once.

These sling swivels are designed for airguns with break barrels or under levers. These high-quality sling swivels are ideal for shooters who wish to fit a sling to their spring powered air rifles and airguns.
Some people prefer using something like garden hose tubing as a clamp and retention surface, that will likewise counteract movement or slippage from harder use.
Some people prefer using copper tubing instead, as it serves as an improved crush washer and seals tightly, though perhaps not really needed for a break barrel rifle.

Swivels to fit 16mm barrel
Fits: HW90/90K, HW80/80K, HW95K, BSA: Lightning, Supersport, Webley: Stingray, Xocet & Tomahawk, fpr example.

In terms of installing sling studs / loops into your rifle stock, we have found no better tutorial on YouTube than the following;

Likewise, for the barrel band, for inspiration on how to do it professionally;