Battery 12-24V Lithium Battery Charger Controller Board HW-632 **LOCAL STOCK**

Battery 12-24V Lithium Battery Charger Controller Board:

Specifications:

Input Voltage: 12-30V DC
Charging Type: 12 - 24V Storage Battery Charger (Lead acid, Nimh, Nicd, Li-ion)
Maximum Current: 20A
Output Type: Direct Output
Size: 82 x 58 x 18mm

Using Method:
1. Set Starting Voltage: In normal display voltage state,press the button will display start charging voltage;long press for 3s the digital tube will flash;you can start or stop button to set starting up charge voltage value
2. Set Stop Voltage: In normal display voltage state,press the button will display stopping charge voltage;long press the button for 3s the digital tube will flash;you can start or stop button to set stopping charge voltage value
3. Factory Reset: In power on state press the start/stop button at the same time,digital tube will display 888, which represents factory reset settings.

Explanation: This is a voltage charge start and stop control board, where you are able to set/adjust the stop and start charge voltage for any type of battery. (eg. 12V Lithium Battery) for example set the stop charge voltage at 14.6V and the start charge voltage for example at 11V. You still need to connect your 14.4-14.8V DC Power supply to the input and connect your Battery to the output of the control Board. When the battery reaches the set full charge voltage, then the Control board will disconnect your DC power supply from charging the battery, and when your battery reaches the set low voltage, then the control Board will reconnect your DC power supply and charge the battery until it reaches full charge voltage again. Check the specs of your battery such as: Max full charge voltage to ensure you set the stop charge voltage accordingly on the control board. Also check the Max charging current of your battery to enable you to select the correct DC Power Supply to purchase

Please see all our listings here:
https://www.bidorbuy.co.za/seller/4397469