BENETECH GM1020 Digital LUX Meter
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 15 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Product code
S-HC-0542
Bob Shop ID
593646286
About the product
Application: Widely used in electro-optical sources, research teaching, metallurgy building, industry inspection as well as agriculture researching and illumination control.
1. Powerful measurement functions: It can measure not only current values, maximum and minimum of illuminance and temperature, but also illuminance difference, integrating illuminance and average integrating illuminance.
2. Support automatic storage of illuminance data (up to 1900 groups) and manual storage of illuminance data (up to 60 groups)
3. Wide measuring range (0 to 200000 lux) and support automatic range shift
4. Delivered with computer-based analysis software, allowing users to operate the meter with ease
5. Quick response, high portability and operable by a single hand.
6. The sensor can be rotated.
7. Backlight
Specifications
1. Photoelectric element: silicone diode
2. Thermal probe: NTC thermistor
3. Illuminance Measuring Range: Total measuring range: 0-200000 Lux
- x1: 0-199.9 Lux
- x10: 200-199.9 Lux
- x100: 2000-1999.9 Lux
- x1000: 20000-200000 Lux
4. Temperature measuring range: 0-40 Celsius Degree
5. Illuminance accuracy: +-3%rdg (below 10000 Lux); +-4%rdg (above 10000 Lux)
6. Temperature accuracy: +-1.0Celsius Degree
7. Units of illuminance and temperature: Four combinations of units are available
- Lux / Celsius Degree
- Lux / Fahrenheit Degree
- FC / Celsius Degree
- FC / Fahrenheit Degree
8. Illuminance data storage
- Automatic: Up to 1900 groups of data can be stored. LuxLAB is used to set the storage cycle and whether to start or stop storage.
- Manual: Up to 60 groups of data can be stored. Whether to store is determined manually.
9. LCD display update frequency: Twice per second
10. Operating Temperature / humidity: 0-40 Celsius Degree, 10-90%RH
11. Storage Temperature / humidity: -20-50 Celsius Degree, 10-90%RH
12. Power Supply: two AAA batteries (not included)
13. Battery Life: 10 hours (continuous operation with a USB connection)
14. Auto shutdown: you can set anto shutdown timer through LuxLAB.
Application: Widely used in electro-optical sources, research teaching, metallurgy building, industry inspection as well as agriculture researching and illumination control.
1. Powerful measurement functions: It can measure not only current values, maximum and minimum of illuminance and temperature, but also illuminance difference, integrating illuminance and average integrating illuminance.
2. Support automatic storage of illuminance data (up to 1900 groups) and manual storage of illuminance data (up to 60 groups)
3. Wide measuring range (0 to 200000 lux) and support automatic range shift
4. Delivered with computer-based analysis software, allowing users to operate the meter with ease
5. Quick response, high portability and operable by a single hand.
6. The sensor can be rotated.
7. Backlight
Specifications
1. Photoelectric element: silicone diode
2. Thermal probe: NTC thermistor
3. Illuminance Measuring Range: Total measuring range: 0-200000 Lux
- x1: 0-199.9 Lux
- x10: 200-199.9 Lux
- x100: 2000-1999.9 Lux
- x1000: 20000-200000 Lux
4. Temperature measuring range: 0-40 Celsius Degree
5. Illuminance accuracy: +-3%rdg (below 10000 Lux); +-4%rdg (above 10000 Lux)
6. Temperature accuracy: +-1.0Celsius Degree
7. Units of illuminance and temperature: Four combinations of units are available
- Lux / Celsius Degree
- Lux / Fahrenheit Degree
- FC / Celsius Degree
- FC / Fahrenheit Degree
8. Illuminance data storage
- Automatic: Up to 1900 groups of data can be stored. LuxLAB is used to set the storage cycle and whether to start or stop storage.
- Manual: Up to 60 groups of data can be stored. Whether to store is determined manually.
9. LCD display update frequency: Twice per second
10. Operating Temperature / humidity: 0-40 Celsius Degree, 10-90%RH
11. Storage Temperature / humidity: -20-50 Celsius Degree, 10-90%RH
12. Power Supply: two AAA batteries (not included)
13. Battery Life: 10 hours (continuous operation with a USB connection)
14. Auto shutdown: you can set anto shutdown timer through LuxLAB.