| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
The BNC connector is primarily used on CCTV camera systems. Connect these systems directly to a cost effective VGA Screen with a better resolution than standard CCTV monitors which are much more expensive than standard VGA displays.
You can also connect any DVD Player, DSTV or any device with a svideo port to the device to be converted to display on a VGA screen. Use a composite to Svideo cable if the device has a composite (Yellow RCA) output only.
Specifications
¿ Transform AV into VGA signal
¿ 1 channel BNC input
¿ 1 channel S-video input
¿ 1 channel VGA signal input
¿ 1 channel VGA signal output
¿ DC-5V outside power supply
¿ Supports signal: VIDEO (Composite), BNC Connections, S-VIDEO, VGA
¿ Support system : PAL/NTSC Output
¿ Resolution: 800×600@60HZ,800×600@75HZ,1024×768@60HZ
¿ Dimentions : 10 x 6 x 3 cm (4.0 x 2.25 x 1.0 in.)
¿ Can adjust lightness, contrast, color saturation etc.
¿ Image freeze
¿ Save current work state when the power cut
¿ Caption prompt in work state
Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.
** NOTE!! - Composite / BNC has a limitation of 480 scanlines / 480i resolution (more or less equal to 640 x 480) which is a limitation by international specification and not a limitation of the converter. The converter will supply the same resolution output as input (up to 1024 x 768)
