Main centres: | 1-3 business days |
Regional areas: | 3-4 business days |
Remote areas: | 3-5 business days |
Plug-and-play wireless system in a stompbox-size format for pedalboards
Optimum wireless connection set automatically, with no complicated setup required
Newly developed BOSS technology delivers premium audio performance with rock-solid stability, ultra-low latency (2.3 ms), and 65-foot/20-meter range (line-of-sight propagation)*
Built-in rechargeable battery in transmitter provides up to 12 hours of continuous playing time
Plug the transmitter into the receivers docking port for charging and automatic wireless setup**
Selectable cable tone simulation options: short, long, and bypass
Receiver powered by optional PSA-S adaptor or two AA batteries
With PSA-S adaptor power, the receivers DC output can distribute power to one or more pedals using an optional PCS-20A daisy-chain cable
Spare WL-T Transmitter available separately
* The transmission range may vary due to local conditions.
** To charge the transmitter, the receiver must be powered via a BOSS PSA-S adaptor. Its also possible to directly charge the transmitter with a standard USB adaptor (5 V/500 mA or higher).
Specifications (RECEIVER)
Wireless Format
BOSS proprietary digital audio format
Wireless carrier frequency
2.4 GHz
Compatible Channels
14
(May vary due to local conditions)
Transmission Range
65 feet line-of-sight
(May vary due to local conditions)
Latency
2.3 ms
Dynamic Range
110 dB or greater
Frequency Response
20 Hz--20 kHz
Nominal Input Level
-10 dBu
Input Impedance
1 M ohm
Nominal Output Level
-10 dBu
Output Impedance
1 k ohm
Recommended Load Impedance
10 k ohms or greater
Controls
CABLE TONE switch (OFF/SHORT/LONG)
Indicators
POWER
RECEIVE
Connectors
INPUT jack: 1/4-inch phone type
OUTPUT jack: 1/4-inch phone type
TRANSMITTER jack: 1/4-inch TRS phone type
DC IN jack
DC OUT jack
Power Supply
Alkaline battery (AA, LR6) x 2
AC adaptor (sold separately)
Current Draw
During wireless operation: 60 mA
While charging transmitter: 320 mA
Expected battery life under continuous use
Alkaline battery (AA, LR6): Approximately 7 hours
* These figures will vary depending on the actual conditions of use.
Accessories
Owner's Manual
Leaflet USING THE UNIT SAFELY
Transmitter
Rubber foot x 4
Alkaline battery (AA, LR6) x 2
An AC adaptor (PSA-S series) is required to charge the transmitter (WL-T).
Options (sold separately)
AC adaptor: PSA-S series
Parallel DC cord: PCS-20A (DC Plug x8)
Size and Weight (RECEIVER)
Width
72 mm
2-7/8 inches
Depth
121 mm
4-13/16 inches
Height
56 mm
2-1/4 inches
Weight (including battery)
220 g
8 oz
Specifications (TRANSMITTER (WL-T))
Nominal Input Level
-10 dBu (1 M ohm)
Indicator
BATTERY
Connectors
Input plug: 1/4-inch TRS phone type
DC IN 5 V port: USB Micro-B type
Power Supply
Rechargeable lithium-ion battery
Supplied from the DC IN 5 V port
Current Draw
350mA
Battery charging time
Approximately 3 hours
Expected battery life under continuous use
Approximately 12 hours
* These figures will vary depending on the actual conditions of use.
Size and Weight (TRANSMITTER (WL-T))
Width
87 mm
3-7/16 inches
Depth
22 mm
7/8 inches
Height
36 mm
1-7/16 inches
Weight
43 g
2 oz