Vehicle Fitment & Part Details
This brake master cylinder (101623) is listed for a range of Volkswagen models, cross-referenced to OE 1H1611019C. It has a 20.64 mm piston diameter and is for the Bendix brake system. Confirm compatibility by matching the listed fitment details, bore size and OEM reference number before ordering. Verify VIN.
Key Details
- SKU
- 101623
- Component
- Brake Master Cylinder
- Piston Diameter
- 20.64 mm
- Brake System
- Bendix
- Thread Size
- 10 x 1 (4)
- OEM References
-
- VW: 1H1611019C
- VW: 1H1611019A
- VW: 1H2611019
- VW: 357611019
- Primary Fitment
- VW Golf III (1H1) (1991-1998)
Listing Highlights
- 20.64 mm bore brake master cylinder for the Bendix brake system.
- Listed for VW Golf III, Jetta II / III, Polo III, Caddy II and T4 Transporter applications shown in the fitment table.
- Cross-referenced to VW OE numbers for compatibility checking before ordering.
Product Specifications
| Specification | Value |
|---|
| Piston Diameter | 20.64 mm |
|---|
| Brake System | Bendix |
|---|
| Thread Size | 10 x 1 (4) |
|---|
Vehicle Fitment
This brake master cylinder is listed for 26 applications across VW Caddy II, Golf III, Golf IV Cabriolet, Jetta II, Jetta III, Polo III and T4 Transporter. Use the full table below to confirm model, chassis, year range, engine and power before ordering.
View Full Vehicle Fitment (26 applications)
| Model | Chassis | Years | Engine | Power |
|---|
| Caddy II Box Body/MPV | 9K9A | 1995-2004 | 1.4 (AEX, APQ, AUD) | 44kW/60HP |
|---|
| Caddy II MPV | 9K9B | 1995-2003 | 1.4 (AEX, AKV, APQ, AUD) | 44kW/60HP |
|---|
| Golf III | 1H1 | 1991-1998 | 1.6 (AEK, AFT, AKS) | 74kW/101HP |
|---|
| Golf III | 1H1 | 1991-1998 | 1.8 (AAM) | 55kW/75HP |
|---|
| Golf III | 1H1 | 1991-1998 | 1.8 (ABS, ACC, ADZ) | 66kW/90HP |
|---|
| Golf III | 1H1 | 1991-1998 | 1.9 TDI (1Z, AHU, ALE) | 66kW/90HP |
|---|
| Golf III | 1H1 | 1991-1998 | 2.0 (2E, ABA, ADY, AGG, AKR) | 85kW/115HP |
|---|
| Golf III | 1H1 | 1991-1998 | 2.0 GL (AEP) | 79kW/107HP |
|---|
| Golf III | 1H1 | 1991-1998 | 2.0 GTI 16V (ABF) | 110kW/150HP |
|---|
| Golf III Cabriolet | 1E7 | 1993-1998 | 1.8 (AAM, ANN) | 55kW/75HP |
|---|
| Golf III Cabriolet | 1E7 | 1993-1998 | 1.8 (ABS, ADZ, ANP) | 66kW/90HP |
|---|
| Golf III Cabriolet | 1E7 | 1993-1998 | 2.0 (2E, ADY, AGG, AKR) | 85kW/115HP |
|---|
| Golf III Variant | 1H5 | 1993-1999 | 1.9 TD (AAZ) | 55kW/75HP |
|---|
| Golf III Variant | 1H5 | 1993-1999 | 1.9 TDI (AFN) | 81kW/110HP |
|---|
| Golf IV Cabriolet | 1E7 | 1998-2002 | 2.0 (AGG, AKR, ATU, AWF, AWG) | 85kW/115HP |
|---|
| Jetta II | 19E, 1G2, 165 | 1983-1992 | 1.8 16V (KR) | 102kW/140HP |
|---|
| Jetta II | 19E, 1G2, 165 | 1983-1992 | 1.8 16V (PL) | 95kW/129HP |
|---|
| Jetta III | 1H2 | 1991-1998 | 1.6 (AEK, AFT, AKS) | 74kW/101HP |
|---|
| Jetta III | 1H2 | 1991-1998 | 1.8 (ABS, ADZ) | 66kW/90HP |
|---|
| Jetta III | 1H2 | 1991-1998 | 2.0 (2E, ABA, ADY, AGG, AKR) | 85kW/115HP |
|---|
| Polo III Classic | 6V2 | 1995-2005 | 1.6 (AEH, AFT, AKL, APF, AUR) | 74kW/100HP |
|---|
| Polo Variant | 6V5 | 1997-2001 | 1.4 (AEX, AKK, AKV, ANW, APQ, AUD) | 44kW/60HP |
|---|
| Transporter / Multivan T4 Bus | 70B, 70C, 7DB | 1990-2003 | 2.0 (AAC) | 62kW/84HP |
|---|
| Transporter / Multivan T4 Bus | 70B, 70C, 7DB | 1990-2003 | 2.5 (AAF, ACU, AEN, AEU) | 81kW/110HP |
|---|
| Transporter / Multivan T4 Bus | 70B, 70C, 7DB | 1990-2003 | 2.5 (AET, APL, AVT) | 85kW/115HP |
|---|
| Transporter / Multivan T4 Bus | 70B, 70C, 7DB | 1990-2003 | 2.5 Syncro (AAF, ACU, AEU) | 81kW/110HP |
|---|
Fitment Notes
- Always match the OEM reference number, bore size (20.64 mm) and vehicle details before ordering. Verify VIN.
- Confirm the brake system type (Bendix) against your vehicle, as VW models of this era were fitted with more than one master cylinder bore and system.
Compatibility Verification Notes
- Confirm compatibility using VIN, bore size, brake system, OE reference and original part comparison before ordering.
- Match the supplied fitment details to your vehicle, including model, year range and engine code.
- This listing is for part identification and compatibility checking only. Installation must be carried out according to the vehicle manufacturer's service information by a suitably qualified person.
Common Questions
Will this brake master cylinder fit my VW?
This part (101623) is listed for the fitments shown on this page. Confirm by matching the fitment details, bore size and OE reference. Verify VIN.
What bore size is this?
20.64 mm piston dia...
