Car Headlight Lens Restoration DIY System Professional

Restorer Polishing Kit

Product Features

• Plastic headlight lenses can yellow with age, reducing headlight brightness, and new headlight lenses can be expensive. 
  

• The Headlight Lens Restoration Kit lets you shine and restore plastic lenses, including headlights, taillights, fog and directional lights. 
  

• By restoring clarity to the lens, the performance of the headlight is improved and the appearance of the vehicle is enhanced 
  

• Now you can produce professional results with the Headlight Lens Restoration Kit. 
  

• Kit includes all items necessary to perform the task.

  Features:

  Helps restore the clear plastic by removing haze and discoloration

  Provides a deep clean to the yellowed, hazed headlights with the use of a specially designed polish and sealant

  Improves visibility and safety

  One kit is intended to restore two headlight lenses. 

  This inexpensive kit saves hundreds of dollars and restores crucial night time visibility by restoring your own lenses. 

  Easy, 5-step process requires as little as an hour to remove scratches and restore cloudy, dull lenses.

  The Kit Contains:

  1x Backer Pad M10 Thread+Adapter

  1x Masking tape

  1x Sponge Disc Orange

  1x Sponge Disc White

  2x Waterproof Premium Sandpaper P800   grit

  2x Waterproof Premium Sandpaper P1200   grit

  2x Waterproof Premium Sandpaper P2000 grit

  2x Polishing Paste 40g

  2x UV Protective Paste 3ml

  1x Instruction Manual

  Process:

  Mask 

  After cleaning the lens with water, protect the trim and painted surfaces around the headlight lens with masking tape. 

  Sand 

  Use a grinding tool (NOT INCLUDED) to mount the disc. Use the three grits (P800,P1200,P2000) to sand away the yellowing blurred surface defects from lens. 

  Replace with a new sanding disc if needed and continue sanding until the yellow layer is completely removed. 
  Spray water on the surface continuously if the headlight becomes dry while sanding.

  Refine

  Dispense some polishing paste (STEP 2) onto the orange sponge to polish out the remaining scratches. When the sponge becomes dry, continue by adding polishing paste until the scratches have been removed and the lens is clear.

  Polish and Protect 

  Remove the masking tape and wipe the headlight lens using the attached white sponge. 
  Use the UV Protective Paste (STEP 3) to polish and prevent UV damage.

  Product Storage:

  Products shall be ideally stored in a cool, dry location in unopened containers at a temperature between 8-28 degree c ( 46 to 82F) unless otherwise labeled.

• IMPORTANT NOTICE - This KIT can be used manually by shining by hand. However it is recommended to use a power drill or Dremel type tool to achieve the best results. All power tools are NOT INCLUDED.