Car Parking Camera Video Control System Channel Converter Front and Rear View 2-Way Control Box wit

Two-Way Control Box : The two-way control box allows you to control the camera from both the front and rear of your car, making it easier to monitor your surroundings.Manual Switch : The manual switch allows you to turn the camera on and off easily, without having to go through any complicated settings.Wireless Connectivity : While the camera does have a wire, it can be easily connected to your car's electrical system, making it hassle-free to install.Rear View Camera : The rear view camera provides a clear view of what's behind your car, making it easier to reverse and avoid accidents.Functions: 1. Automatic front view when staring: When the engine is started, the system activates the monitoring machine and the front camera to check the front view for 8 seconds then turn it off.2. Automatic rear view: When you pull in reverse, the system is activated by the monitor as is the rear view camera. It then switches to the front view of the video camera in 15 seconds, then stops.3. Front view always activate mode: Push the control switch to enter the front mode.In this mode, the system will monitor and activate the front of the camera at all times.Exit the mode by pressing the control switch again.Working priority: Rear view Front viewFront view camera: presented by the remote control system.Rear view camera: submitted by the control system or can be activated by being in reverse.Specification: Power: max: 50MA, 12VSystem signal: PAL \/ NTSCVideo output: 1.0VPP \/ 75Operating temperature: -20 to 80NOTE: The factory batches are different, and the wiring colors and stickers are different, which does not affect the use.Material: Metalcolour: BlackPackage Contents: 1 x Car Parking Camera Video Control SystemOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +\/- 1-3cm.