Car Sticker - reduced to clear !!

CAR STICKERS

2 identical steakers in pack - 1 for each side 

measuring 60cm x 14.5 cm

 

Sticker Application Instructions

1.  
2. Clean the area thoroughly. Measure and place the sticker in the desired location. Put a piece of masking tape on the sticker to hold it in place.
3. Hint: For best results do not install the sticker in extreme heat or cold.
4. Lift the sticker up and peel the white paper backing off the sticker. Be careful not to pull the masking tape off.
5. Slowly lower the sticker and rub it in place with a credit card or similar item.
6. Wait a few minutes then slowly peel the clear cover off at an angle. Be very careful not to pull the sticker off the surface. If the sticker pulls away from the surface repeat step 3.
7.  
8. Large Sticker & Windshield Decal Instructions
9.  
10. Clean the area thoroughly. Measure and placsticker in the desired location. Put a piece of masking tape on the top of the sticker to hold it in place.
11.  
12. Windshield Decals - Cut into 3 parts between letters
13.  
14. Lift the sticker up and peel the white paper backing off the sticker. Be careful not to pull the masking tape off. Keep ahold of the bottom of the sticker to keep it from sticking to itself or the surface before you want it to.
15.  
16. Windshield Decals - Repeat step 2 & 3 for each part.
17.  
18. Slowly lower the sticker and rub it in place with a credit card or similar item. Start at the top middle and then the outer edges. Firmly rub the sticker in place to make sure there is no air trapped under the sticker.
19.  
20. Wait a few minutes then slowly peel the clear cover off at an angle. Be very careful not to pull the sticker off the surface. If the sticker pulls away from the surface repeat step 3. Use a pin to poke any air bubbles in the center and push the air out through