CELTO ACOUSTIQUE CT12 G2

Specifications
— Speaker type : Multi-purpose full range
— Power Handling (AES standard) : 450W RMS / 1800W Peak
— Nominal impedance : 8 ohms
— Average sensitivity : 97dB / 1W / 1m
— Maximum SPL (calculated) : 124 dB RMS / 130dB Peak
— Frequency response (-6dB no preset) : 50~22000Hz
— Nominal directivity (-6dB) : 80° (H) x 50° (V)
— Cabinet material : Outdoor grade Birch Plywood
— Cabinet finish : Textured Waterborne Black coating | Integral Airnet fabric on Front grill
— Floor monitor use : Yes (symetrical)
— Flying hardware : 17 M8 points
— Mounting hardware : Ø35mm socket (0° and 10°)
— LF : 12 CELTO Acoustique 12MB402
— Woofer Chassis : Die Cast Aluminum
— Woofer Voice coil diameter : 3 / 75mm
— HF : CELTO Acoustique ACD40
— HF RMS power (AES standard) : 80W above 1.5kHz
— HF Exit : 1 / 25mm
— HF Voice coil diameter : 1.7 / 44mm
— HF Diaphragm : HSP Annular Ring Radiator
— Crossover : 1.5kHz 2-way passive network
— Connectors : Genuine NEUTRIK, 2pcs Speakon NL4MP
— Speaker size (HxWxD) : 356x620x345 mm
— Speaker Weight : 21kg
— Shipping information : 26kg | 450x720x450 mm
— Accessories : CT12G2-YOKE | CT12-SBAG (padded cover bag) | CPC-70 (pole bar with crank) | KTV-BRKT1 (ceiling mounting braket) | WMBRKT40 (wall mounting braket)

Applications
CT12 G2 loudspeaker system is suitable for near field main PA reinforcement with or without subwoofer, portable system or permanent installation, monitor in small stages, and delay fill.
Suitable for:
— FoH
— Multi-functional room
— Auditorium and Theater
— Pub
— Bar
— Commercial announcements