CELTO ACOUSTIQUE CT15 G2

 Speaker type : Multi-purpose full range
— Power Handling (AES standard) : 700W RMS / 2800W Peak
— Nominal impedance : 8 ohms
— Average sensitivity : 98dB / 1W / 1m
— Maximum SPL (calculated) : 127 dB RMS / 133dB Peak
— Frequency response (-6dB no preset) : 48~22000Hz
— Nominal directivity (-6dB) : 80° (H) x 50° (V)
— Cabinet material : Outdoor grade Birch Plywood
— Cabinet finish : Textured Waterborne Black coating | Integral Airnet fabric on Front grill
— Floor monitor use : Yes (symetrical)
— Flying hardware : 16 M8 points
— Mounting hardware : Ø35mm socket (0° and 10°)
— LF : 13.5 CELTO Acoustique 13B700
— Woofer Chassis : Die Cast Aluminum
— Woofer Voice coil diameter : 3.6 / 91mm
— HF : CELTO Acoustique ACD44
— HF RMS power (AES standard) : 80W above 1.2kHz
— HF Exit : 1 / 25mm
— HF Voice coil diameter : 1.7 / 44mm
— HF Diaphragm : HSP Annular Ring Radiator
— Crossover : 1.4kHz 2-way passive network
— Connectors : Genuine NEUTRIK, 2pcs Speakon NL4MP
— Speaker size (HxWxD) : 445x710x414 mm
— Speaker Weight : 28kg
— Shipping information : 34kg | 520x820x545 mm
— Accessories : CT15G2-YOKE | CT15-SBAG (padded cover bag) | CPC-70 (pole bar with crank) | KTV-BRKT1 (ceiling mounting braket) | WMBRKT60 (wall mounting braket)

Applications
CT15 G2 loudspeaker system is suitable for near field main PA reinforcement with or without subwoofer,portable system or permanent installation, monitor in small stages, and delay fill.
Suitable for:
— FoH
— Multi-functional room
— Auditorium and Theater
— Pub
— Bar
— Commercial announcements