Centurion D2 Turbo Sliding Gate Motor Including 12V 7.2AH Securi Prod Battery and 2 Nova 4 Button Re

• Ensure that the track is kept clear from stones, dirt or any obstruction. Gate brushes can be installed to assist in clearing the obstructions.
• Ensure that the Gate wheels V profile, Gate wheels U profile or GateshoX run freely.
• Manual override the motor and check that the gate runs freely without any obstruction.
• Check that the rack is properly secured to the gate and that it does not press down on the operator pinion at any point while opening or closing.
• Clean around the motor area to ensure that vegetation does not grow to close to the motor and pinion.
• Check that the key still opens and closes the camlock and lubricate if necessary.
• Inspect the inside of the motor by removing the cover and ensure that it is clear of any insects and dust.
• Alternate spare remote controls to ensure that they are working if and when required.
• Test remotes not used often and replace the remote batteries if and when required.
• Check that battery terminals are clean and connectors on battery terminals are not loose and properly secured.

WARNINGS AND LIMITATIONS
• All installations must be done by a suitable qualified technician.
• Under no circumstances may any of the components be modified.

WARRANTY
• 24 Month Carry-in Product Manufacturers warranty. The D2 Motor can be registered online at CentSys.co.za for warranty purposes.

WHAT'S IN THE BOX
1 X Centurion D2 Motor
1 x Securi-Prod 12v 7.2Amp Battery
2 x Centurion Nova 4 Button remotes
1 x Centurion D2 controller — Inside motor
1 x Origin Marker
1 x Base plate
1 x Pack of mounting screws, nuts, washers and bolts