Name: Centurion D2 Turbo Sliding Gate Motor Including 2 Centurion Nova 4 Button Remotes
SKU: KT009-39336973238374
Price: 3525.00 ZAR
Availability: SoldOut

Centurion D2 Turbo Sliding Gate Motor Including 2 Centurion Nova 4 Button Remotes

3 were available / new

R3,525.00

Shipping

R35.00 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30.00 surcharge. This will be calculated at checkout if applicable.
Check my rate

The seller allows collection for this item. Buyers will receive the collection address and time once the order is ready.

The seller has indicated that they will usually have this item ready to ship within 3 business days. Shipping time depends on your delivery address. The most accurate delivery time will be calculated at checkout, but in general, the following shipping times apply:

Standard Delivery

Main centres:	1-3 business days
Regional areas:	3-4 business days
Remote areas:	3-5 business days

Seller

IOTREND101

100.00 % Positive ratings

Buyer protection

How you're covered

Get it now, pay later

Condition

New

Location

South Africa

Product code

KT009-39336973238374

Bob Shop ID

559175863

Product Code: D2TB0000V2

The Centurion D2 Turbo Sliding Gate Operator is fast, reliable and affordable. The Centurion D2 Gate Motor has an exceptional speed of 400mm per second and boasts with a powerful peak push force of 9kgf. The D2 Motor is quick and easy to install and set up, with all settings easily configurable via two dials on the controller. With loads of features, the Centurion D2 Turbo is the complete motor for a standard domestic gate of four meters in length and not weighing more than 250kg. Included in the kit with the Centurion D2 Motor is 2 Centurion Nova 4 Button remote controls.

FEATURES
Turbo speed opens and closes the gate quicker and reduces security risks.
Very easy to install and user friendly set up, saving you time and money.
Reliable battery backup will allow the gate to operate in the event of a power outage. (Battery not included). Compatible with 12v 7.2Amp Securi Prod battery.
Built in multichannel Centurion receiver. Compatible remotes are Nova 1 Button, 2 Button and 4 Button remotes.
Multiple Modes of Operation.
Adaptive Collision Sensing.
Maintenance is effortless and convenient as modular components clip together.
Lockable with easy manual override.
Robust steel pinion allows for easy retro-fitting and ensures reliable operation.

SPECIFICATIONS

Product type	Sliding Gate Motor
Model	Centurion D2 Turbo
Input voltage	90V - 240V AC 10%, 50Hz
Motor voltage	12V DC
Motor power supply	Battery-driven (standard capacity - 12V 5Ah)
Current consumption (mains)	Intergral with controller 1A @ 13.7V 1%
Current consumption (rated load)	8/12A
Current consumption (quiescent load)	95mA
Operator push force - starting	18kgf
Operating push force - rated	8kgf
Gate mass - maximum	250kg
Gate length	20m
Gate speed - m/min	22 - 26m/min
Gate speed - mm/sec	367 - 433mm/sec
Drive pinion	17T Module 4
Maximum daily cycle	10 cycles/day
Design life	30 000 cycles
Collision sensing	Electronic
Operating temperature	-15 C to 50 C
Degree of protection	IP54
Controller incorporated	D2 Controller_H
Onboard receiver type	Nova code-hopping onboard, multichannel
Receiver frequency	433.92MHz
Receiver code storage capacity	32 transmitter buttons
Dimensions - motor	244mm(l) x 170mm(w) x 310mm(h)
Dimensions - remote	35mm(l) x 17mm(w) x 60mm(h) x 2
Dimensions - packaging	255mm(L) x 188mm(W) x 333mm(H)
Mass of unit packed	5.75kg
Warranty	24 Month carry in Manufacturers warranty

INSTRUCTIONS FOR USE
Refer to detailed installer manual.

MAINTENANCE AND CARE
Ensure that the track is kept clear from stones, dirt or any obstruction. Gate brushes can be installed to assist in clearing the obstructions.
Ensure that the Gate wheels V profile, Gate wheels U profile or GateshoX run freely.
Manual override the motor and check that the gate runs freely without any obstruction.
Check that the rack is properly secured to the gate and that it does not press down on the operator pinion at any point while opening or closing.
Clean around the motor area to ensure that vegetation does not grow to close to the motor and pinion.
Check that the key still opens and closes the camlock and lubricate if necessary.
Inspect the inside of the motor by removing the cover and ensure that it is clear of any insects and dust.
Alternate spare remote controls to ensure that they are working if and when required.
Test remotes not used often and replace the remote batteries if and when required.

WARNINGS AND LIMITATIONS
All installations must be done by a suitable qualified technician.
Under no circumstances may any of the components be modified.

WARRANTY
24 Month Carry-in Product Manufacturers warranty. The D2 Motor can be registered online at CentSys.co.za for warranty purposes.

WHAT'S IN THE BOX
1 X Centurion D2 Motor
2 x Centurion Nova 4 Button remotes
1 x Centurion D2 controller Inside motor
1 x Origin Marker
1 x Base plate
1 x Pack of mounting screws, nuts, washers and bolts

NO BACKUP BATTERY INCLUDED

Report a problem

Similar products

Centurion D2 Turbo Sliding Gate Motor Including 2 Centurion Nova 4 Button Remotes

Product details

Recently viewed

Similar products

Centurion D2 Turbo Sliding Gate Motor Including 2 Centurion Nova 4 Button Remotes

Product details

0.0 out of 5

Recently viewed