Centurion D5-Evo SMART+ Gate Motor Kit with 2 Remotes - No Base Plate

The Centurion D5-Evo SMART+ Gate Motor Kit with Two NOVA TX4 Remotes is a connected sliding gate operator kit for heavier residential gates and light-industrial entrances. It is suitable for sliding gates weighing up to 500 kg and measuring up to 20 metres in length. The 12V battery-driven system supports continued gate operation during power interruptions once a suitable battery has been installed. This kit provides the operator, SMART+ controller, charger and two remotes, but does not include the foundation plate, battery or gate rack.

Key Features

• Designed for heavier sliding gates. Suitable for gates weighing up to 500 kg and measuring up to 20 metres long, making it appropriate for larger residential entrances and selected light-industrial sites.
• Provides faster everyday access. Gate movement can reach up to 24 metres per minute, depending on the gate load and the speed settings selected during commissioning.
• Keeps operating during power interruptions. The motor runs from a 12V battery system, allowing the gate to continue operating when mains electricity is unavailable. A suitable battery must be purchased separately.
• Supports connected setup and diagnostics. Integrated Bluetooth and Wi-Fi allow a trained installer to commission the operator, configure settings and inspect system information using the supported MyCentsys applications.
• Manages large numbers of users. The onboard multichannel receiver can store codes for up to 1,500 remotes, making the operator suitable for homes, shared properties and access-controlled sites.
• Allows flexible accessory integration. Three configurable inputs and outputs support compatible safety, access-control and signalling accessories.
• Suitable for frequent daily operation. The operator supports a 50% duty cycle and up to 150 operations per day under the manufacturers specified operating conditions.
• Protects the gate and its surroundings. Electronic collision sensing monitors resistance during travel and can stop or reverse the gate when an obstruction is detected. Correct setup and approved safety beams are still recommended.

Compatibility & App Support

The D5-Evo SMART+ works with the MyCentsys Pro app for installer commissioning, configuration and diagnostics. The MyCentsys Remote app gives authorised end users connected gate control and status visibility once the system has been correctly commissioned and connected. The operator can also be integrated with compatible Centurion safety beams, intercoms, access-control equipment and other supported accessories.

Whats Included

• 1 x Centurion D5-Evo SMART+ Sliding Gate Operator
• 1 x SMART+ Wi-Fi Controller
• 1 x 12V Charger
• 2 x Centurion NOVA TX4 Four-Button Remotes

Note: The foundation/base plate, 12V 7Ah battery and gate rack are not included and must be purchased separately.

Did You Know?

• The maximum advertised speed does not have to be used on every installation. Your installer can configure slower opening and closing speeds to suit the gates weight, mechanical condition and the requirements of the entrance.
• The D5-Evo SMART+ can be used with a correctly designed solar power system. The solar panel, regulator and suitable battery are separate components and should be specified according to the sites expected daily usage and available sunlight.
• A higher-capacity compatible battery may be used where longer standby time is required. Battery sizing, charging requirements and available space should be checked by the installer before installation.