Clear Acrylic Raspberry Pi 3B/3B+/4/5 open VESA Lite case/bracket(for 100x100 mount)

What's in the box?

1 x Top plate
1 x VESA plate
4 x M4 Nylon screws
4 x Acrylic spacers
4 x M2.5x5mm MF standoffs
4 x M2.5x18mm FF standoffs
8 x M2.5x6 screws

Resources

How To Install

The VESA board was designed to have the cables on your Pi face any direction that you might require. Keep this in mind when attaching the plate to your Monitor/TV

1. Install the M2.5x5 MF standoffs on the VESA plate with the M2.5 screws on the monitor side of the plate and the male side of the standoffs facing away to mount the RPi.
2. Use the M2.5x18 FF standoffs to screw down the RPi on the short standoffs.
3. This would be a good time if you wanted to mount an active cooler onto your RPi 5.
4. Use the M2.5x6 screws to screw down the top plate on the 18mm FF standoffs
5. You are now ready to mount the VESA plate onto your monitor/TV. Turn the case to have your RPi cables face in whichever direction works best for you.(up/down/left/right) Push the M4 nylon screws through the VESA plate, through the spacers and screw them into your monitor VESA holes. 
6. All done. You can now plug in your cables, drives etc. and start up your RPi.