COMPOUNDING SPONGE 150MM X 50MM X M14 PREMIUM WHITE
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 2 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Buyer Protection
How you're covered
Get it now, pay later
Product information
Condition:
New
Location:
South Africa
Product code:
VS-TCCS15014-1
Bob Shop ID:
609012973
Compounding sponge
Pattern: Standard
Density: Firm
Colour: White
Diameter: 150mm
Thread/Hook & Loop: M14
Application:
The compounding sponge should be used with an automotive polisher.
It is necessary to polish a vehicle body panel when:
- The panel has been newly painted with a clear-coat.
- Shallow scratch marks need to be removed.
- The panel has suffered from oxidation.
- Swirl marks and hologram defects need to be removed.
Compounding sponge uses:
| COLOUR | POLISH | COMPOUND |
| White | Good | Best |
| Orange | Good | Best |
| Red | Best | |
| Black | Best |
Compounding sponge range:
| ORDER NO. | DENSITY | COLOUR | DIAMETER | THREAD | PATTERN |
| SPC00101 | Firm | Orange | 200mm | Hook & Loop | Standard |
| SPC00100 | Soft | Yellow | 200mm | Hook & Loop | Standard |
| SPC00102 | Soft | Red | 200mm | Hook & Loop | Standard |
| TCCS15058 | Firm | White | 150mm | 5/8 UNC | Standard |
| TCCS15014-1 | Firm | White | 150mm | M14 | Standard |
| TCCS15014-4 | Firm | White | 150mm | M14 | Standard |
| TCCS15014 | Firm | Orange | 150mm | M14 | Standard |
| TCC15014-2 | Soft | Red | 150mm | M14 | Standard |
| TCCS15014-3 | Soft | Black | 150mm | M14 | Standard |
| TCCS15014-5 | Soft | Black | 150mm | M14 | Waffle |
| SPC00124 | Firm | Blue | 125mm | Hook & Loop | Standard |
NOTE:
For the 200mm Hook & Loop compounding sponges, use the M14 backing padSPC00106.
Adaptors to convert or lenghten the polisher's thread:
| ORDER NO./td> | MALE THREAD | FEMALE THREAD |
| SPC00055 | 5/8 UNC | 5/8 UNC |
| SPC00053 | 5/8 UNC | M14 |
| SPC00054 | M14 | 5/8 UNC |
| SPC00052 | M14 | M14 |