COOLITMIST DIY Cooling Kit

Easy to assemble and super affordable! You would usually pay an arm and a leg to keep your patio cool, but with this DIY Home Mist Cooling Kit, anyone can do it!

CONTENTS

1. +/- 6.6m misting and connecting line pipe.
2. 6 X brass and stainless steel misting nozzles.
3. 5 X inline pipe to nozzle connectors.
4. 1 X end piece pipe to nozzle connector.
5. 1 X ¾ inch tap to pipe connector.
6. 10 X Black cable ties ( To secure misting line to structure )

INSTRUCTIONS

Measure and cut misting pipe at the desired length intervals (at the points where you want the misting nozzles situated along the misting pipe.) Unscrew the locking caps on the inline nozzle connectors (about half way), and push the misting pipe all the way into the connectors, then tighten the locking caps to secure the misting pipe in place. Do the same for the end nozzle connector and the tap connector. Screw the brass nozzles into the connectors securely. Fix the misting line to your structure (patio, lapa, gazebo, umbrella etc) using the cable ties provided. Connect to your tap fitting or to the clip-on gardena fittings on your garden hose pipe.You are now ready to use your misting kit.

NOTE : Open tap slowly (not to full) allowing the misting pipe to fill, and then regulate as required when the nozzles are producing the mist spray. If the system has not been used for a long period (ie during the winter months) and the nozzles appear to be blocked, they can be unblocked simply by wetting the end of your finger and wiping it across the face of the nozzle