| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
The Crankshaft Position Sensor is listed for the vehicle applications below. Confirm compatibility by matching the listed fitment details and any OEM reference numbers supplied. Verify VIN/engine.
| Specification | Value |
|---|---|
| Pins | 2-pin |
This crankshaft position sensor is listed for 20 applications across Mercedes-Benz, Smart. Use the full table below to confirm model, chassis, year range, engine and power before ordering.
View Full Vehicle Fitment (20 applications)| Make | Model | Chassis | Years | Engine | Power |
|---|---|---|---|---|---|
| Mercedes-Benz | C-CLASS | W202 | 1993-2000 | C 240 (202.026) (M 112.910) | 125 kW / 170 HP |
| Mercedes-Benz | C-CLASS | W202 | 1993-2000 | C 280 (202.028) (M 104.941) | 142 kW / 193 HP |
| Mercedes-Benz | C-CLASS | W202 | 1993-2000 | C 280 (202.029) (M 112.920) | 145 kW / 197 HP |
| Mercedes-Benz | C-CLASS T-Model | S202 | 1996-2001 | C 240 T (202.086) (M 112.910) | 125 kW / 170 HP |
| Mercedes-Benz | C-CLASS T-Model | S202 | 1996-2001 | C 280 T (202.089) (M 112.920) | 145 kW / 197 HP |
| Mercedes-Benz | CLK | C208 | 1997-2002 | CLK 320 (208.365) (M 112.940) | 160 kW / 218 HP |
| Mercedes-Benz | CLK Convertible | A208 | 1998-2002 | CLK 320 (208.465) (M 112.940) | 160 kW / 218 HP |
| Mercedes-Benz | E-CLASS | W210 | 1995-2002 | E 240 (210.061) (M 112.911) | 125 kW / 170 HP |
| Mercedes-Benz | E-CLASS | W210 | 1995-2002 | E 280 (210.063) (M 112.921) | 150 kW / 204 HP |
| Mercedes-Benz | E-CLASS | W210 | 1995-2002 | E 320 (210.065) (M 112.941) | 165 kW / 224 HP |
| Mercedes-Benz | E-CLASS | W210 | 1995-2002 | E 430 (210.070) (M 113.940) | 205 kW / 279 HP |
| Mercedes-Benz | E-CLASS T-Model | S210 | 1996-2003 | E 240 T (210.261) (M 112.911) | 125 kW / 170 HP |
| Mercedes-Benz | E-CLASS T-Model | S210 | 1996-2003 | E 280 T (210.263) (M 112.921) | 150 kW / 204 HP |
| Mercedes-Benz | E-CLASS T-Model | S210 | 1996-2003 | E 320 T (210.265) (M 112.941) | 165 kW / 224 HP |
| Mercedes-Benz | E-CLASS T-Model | S210 | 1996-2003 | E 430 T (210.270) (M 113.940) | 205 kW / 279 HP |
| Mercedes-Benz | M-CLASS | W163 | 1998-2005 | ML 320 (163.154) (M 112.942) | 160 kW / 218 HP |
| Smart | CABRIO | 450 | 2000-2004 | 0.6 (S1OLA1, 450.441, 450.442, 450.443) (M 160 E6AL B03) | 40 kW / 55 HP |
| Smart | FORTWO Cabrio | 450 | 2004-2007 | 0.7 (450.452) (M 160.920) | 45 kW / 61 HP |
| Smart | FORTWO Coupe | 450 | 2004-2007 | 0.7 (450.352, 450.332) (M 160.920) | 45 kW / 61 HP |
| Smart | ROADSTER | 452 | 2003-2005 | 0.7 (452.434) (M 160.922) | 60 kW / 82 HP |
Professional Fitment Required: Electronic, electrical, and electromechanical components require correct identification before installation. Compare the new unit to the removed unit and verify mounting orientation, terminal or connector type, pin count or terminal arrangement, voltage rating, polarity, and any pulley or bracket configuration where applicable. Incorrect installation, polarity reversal, water or moisture ingress, improper connector seating, or mismatched specifications can damage the component, related ECU systems, or cause persistent fault codes. Installation by a qualified, VAT-registered workshop with appropriate diagnostic equipment is recommended.
Returns Notice: Once an electronic, electrical, or electromechanical component has been fitted, plugged in, energised, or shows signs of installation, returns are limited to manufacturing defect only. Confirm part compatibility before opening sealed packaging.
.jpg)
