Vehicle Fitment & Part Details
This crankshaft position sensor is listed for Hyundai H-1 Cargo and Travel (TQ) 2.5 CRDi applications, cross-references Hyundai 39180 4A501 and uses a 3-pin connection. It is supplied with a 280 mm cable and has a 24 mm fitting depth. Confirm compatibility by matching the listed fitment details and OEM reference number. Verify VIN/engine.
Key Details
- SKU
- MAP-100270
- Alternate Search Reference
- MAP100270
- Component
- Crankshaft Position Sensor
- OEM References
-
- Alternate OEM Search References
- 391804A501
- Primary Fitment
- Hyundai H-1 Cargo (TQ) 2.5 CRDi (02/2008-)
- Specs
- 3 pins; With cable; Fitting depth: 24 mm; Cable length: 280 mm
Listing Highlights
- 3-pin electrical connection.
- Supplied with a 280 mm cable.
- Fitting depth: 24 mm.
Product Specifications
| Specification | Details |
|---|
| Number of Pins | 3 |
|---|
| Supplementary Information | With cable |
|---|
| Fitting Depth [mm] | 24 |
|---|
| Cable Length [mm] | 280 |
|---|
Vehicle Fitment
This crankshaft position sensor is listed for 11 Hyundai H-1 applications covering H-1 Cargo (TQ) from February 2008 onwards and H-1 Travel (TQ) from May 2008 onwards. Use the full table below to confirm model, chassis, year range, engine and power before ordering.
View Full Vehicle Fitment (11 applications)
| Model | Chassis | Years | Engine | Power |
|---|
| H-1 Cargo | TQ | 02/2008- | 2.5 CRDi (D4CB) | 125kW/170PS |
|---|
| H-1 Cargo | TQ | 02/2008- | 2.5 CRDi (D4CB) | 81kW/110PS |
|---|
| H-1 Cargo | TQ | 02/2008- | 2.5 CRDi (D4CB) | 120kW/163PS |
|---|
| H-1 Cargo | TQ | 01/2009- | 2.5 CRDi (D4CB) | 85kW/116PS |
|---|
| H-1 Cargo | TQ | 08/2009- | 2.5 CRDi (D4CB) | 100kW/136PS |
|---|
| H-1 Cargo | TQ | 01/2009- | 2.5 CRDi (D4CB) | 94kW/128PS |
|---|
| H-1 Travel | TQ | 07/2008- | 2.5 CRDi (D4CB) | 100kW/136PS |
|---|
| H-1 Travel | TQ | 05/2008- | 2.5 CRDi (D4CB) | 125kW/170PS |
|---|
| H-1 Travel | TQ | 05/2008- | 2.5 CRDi (D4CB) | 120kW/163PS |
|---|
| H-1 Travel | TQ | 08/2011- | 2.5 CRDi (D4CB) | 85kW/116PS |
|---|
| H-1 Travel | TQ | 07/2010- | 2.5 CRDi (D4CB) | 81kW/110PS |
|---|
Fitment Notes
- Always match OEM reference number(s) and vehicle details before ordering. Verify VIN/engine.
Professional Fitment Required: Electronic, electrical, and electromechanical components require correct identification before installation. Compare the new unit to the removed unit and verify mounting orientation, terminal or connector type, pin count or terminal arrangement, voltage rating, polarity, and any pulley or bracket configuration where applicable. Incorrect installation, polarity reversal, water or moisture ingress, improper connector seating, or mismatched specifications can damage the component, related ECU systems, or cause persistent fault codes. Installation by a qualified, VAT-registered workshop with appropriate diagnostic equipment is recommended.
Returns Notice: Once an electronic, electrical, or electromechanical component has been fitted, plugged in, energised, or shows signs of installation, returns are limited to manufacturing defect only. Confirm part compatibility before opening sealed packaging.
Compatibility Verification Notes
- Confirm compatibility using VIN, engine code, chassis, OE reference and original part comparison before ordering.
- Match the listed Hyundai H-1 model, production date, 3-pin connector, cable length and fitting depth.
- Fitment may vary by production date, market, import history and engine variant.
- This listing is for part identification and compatibility checking only. Installation must be carried out according to the vehicle manufacturer's service information by a suitably qualified person.
Common Questions
Will this crankshaft position sensor fit my Hyundai H-1?
This part (MAP-100270) is listed for the Hyundai H-1 Cargo and Travel (TQ) 2.5 CRDi applications shown above. Confirm by matching the vehicle, engine and connector details. Verify VIN/engine.
What OEM part number does this cross-reference?
The Hyundai reference is listed in the Key Details section above. Match it to the original part before ordering.
Does MAP-100270 include a cable?
Yes. The supplied configuration includes a cable with a listed length of 280 mm.
How do I confirm the corre...
