DAJA Carved Color Paper For Ceramic / Glass / Stone / Crystal / Jade(Maroon)
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 15 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Product code
TBD0603233301E
Bob Shop ID
597484962
1. Can be used on ceramics, glass, jade, crystal
2. Identify the front side of the color paper: the upward side is the front side, keep the front side up when pasting
3. Cutting the colored paper: according to the engraved content, cut the colored paper into a suitable size
4. Soak the colored paper: put the cut colored paper into the water and wet it for 1-2 minutes
5. Paste the colored paper: paste the positive colored paper on the object, and blow it with a hot air blower for 1-2 minutes to make it dry
6. Select the pattern: place the object on the engraving machine and select the engraved pattern
7. Start engraving: Do not touch objects while the machine is running, just wait quietly
8. Tear off the colored paper: Take out the soaked object and tear off the excess colored paper
9. Combination of laser coloring paper, penetrating engraving, never fade
10. Dimensions: 39 x 27 x 0.1cm
11. Weight: about 100g
2. Identify the front side of the color paper: the upward side is the front side, keep the front side up when pasting
3. Cutting the colored paper: according to the engraved content, cut the colored paper into a suitable size
4. Soak the colored paper: put the cut colored paper into the water and wet it for 1-2 minutes
5. Paste the colored paper: paste the positive colored paper on the object, and blow it with a hot air blower for 1-2 minutes to make it dry
6. Select the pattern: place the object on the engraving machine and select the engraved pattern
7. Start engraving: Do not touch objects while the machine is running, just wait quietly
8. Tear off the colored paper: Take out the soaked object and tear off the excess colored paper
9. Combination of laser coloring paper, penetrating engraving, never fade
10. Dimensions: 39 x 27 x 0.1cm
11. Weight: about 100g