DC-DC Step Down Converter | XL4015, and Display

DC-DC Step Down Converter | XL4015, and Display

The DC-DC Step Down Converter is a versatile, high-efficiency DC-DC buck converter module designed to take a higher input voltage and "step it down" to a lower, regulated output voltage. It is widely used in DIY electronics, battery charging, and LED driving due to its high current capability and relatively small footprint.

Product features

• Thermal protection: includes internal thermal shutdown and short-circuit protection to prevent the chip from burning out under excessive load.
• LCD display: has a built-in LCD to display that can show you the output voltage instead of using a multimeter to check the reading when you adjust the output voltage with the potentiometer.

Specifications

• Input voltage: 8-36VDC
• Output voltage: 1.25-32VDC
• Output power: up to 75W
• Maximum output current: 5A (highly recommended to use the heat sink if the the current is above 2.5-3A)
• Efficiency: up to 96%

Things to consider before buying the converter

• Buck conversion only: this is a step-down converter. The input voltage must be at least 1.5V higher than the desired output voltage to maintain the voltage regulation.
• Heat Dissipation: While rated for 5A, the module generates significant heat at high power levels. If drawing a higher power, consider using an Aluminum heatsink for long term use.
• Adjustment: the potentiometers are multi-turn (usually 25 turns). You may need to turn the screw counter-clockwise several times before you see the output voltage begin to drop.

Typical applications (not limited to)

• Battery charging
• Solar power
• LED drivers
• General lab power

What is in the box?

• 1 x DC-DC Step Down Converter
• 1 x Mounting screws
• 1 x Heatsink