DC0/1-10V 40mA Dimmer Light Switch LED Driver for Lighting Product
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 15 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Returns
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Bob Shop ID
615117600
Specification:
Input voltage: DC0-10V
Output current: 40mA
Working temperature: -10a??-40a??
Working humidity: 20%-90% RH non-condensing
Storage temperature, humidity: -20a??-80a??, 10%-90% RH
Dimension: 32*20*35.5mm
?
Feature:
The installation must be carried out by electrical specialist in accordance with international and national standards.
The max. load connected to the drive is 10V/40mA
Designed for 1-10V regulating and compatible all 0/1-10V interface dimmable electronic LED driver and power dimmers.
Place the driver away from direct heat sources and in well-already spaces. If the driver is built-in, sufficient ventilation must be ensured.
Min. output connect cable size is 20AWG, max. output cable length: 50m.
When connecting the electronis LED driver&ballasts and power dimmer, careful attention should be paid to connecting + and - as showing as the below wiring diagram.
?
Package included:
1* 0/1-10V led dimmer driver
Input voltage: DC0-10V
Output current: 40mA
Working temperature: -10a??-40a??
Working humidity: 20%-90% RH non-condensing
Storage temperature, humidity: -20a??-80a??, 10%-90% RH
Dimension: 32*20*35.5mm
?
Feature:
The installation must be carried out by electrical specialist in accordance with international and national standards.
The max. load connected to the drive is 10V/40mA
Designed for 1-10V regulating and compatible all 0/1-10V interface dimmable electronic LED driver and power dimmers.
Place the driver away from direct heat sources and in well-already spaces. If the driver is built-in, sufficient ventilation must be ensured.
Min. output connect cable size is 20AWG, max. output cable length: 50m.
When connecting the electronis LED driver&ballasts and power dimmer, careful attention should be paid to connecting + and - as showing as the below wiring diagram.
?
Package included:
1* 0/1-10V led dimmer driver