This item has closed 1 buyer bought 1 item
View other items offered by Racer Gadgets10211
DC5-12V Bluetooth Smart APP Control Magic Color Controller for 2811 2812 LED Pi
New
Indicative market price: R299
R118.36
60% OFF
Closed
3 Feb 19 17:12
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 3 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Product code
1314351
Bob Shop ID
393385336
Package weight: 0.02 kg
Specification:
Working voltage : DC5V~12V
Working current: 20mA~130mA
Working temperature: -20￢ﾄﾃ~60￢ﾄﾃ
Remote distance :30 meters
Product size: 85mm*45mm*22mm
Feature:
1. Long distance APP remote control via WIFI;
2. Support routing mode(AP) and LAN connection mode(STA);
3. Support almost every kind of one-wire or two-wire LED driver IC ;
4. Brightness adjustable, With 180 kinds of patterns and 8 kind of color adjustable patterns;
5.Creatively using from-image-to-effect method for user to DIY any effect;
6. Support setting pixel number and segments number, able to control up to 2048 pixels;
5. DC5V~12V wide range working voltage, preventing reverse connection of power supply;
6. User setting saving;
App control:
Both IOS version and Android OS version are available. (hardware should support WIFI)
Requires IOS version 10.0 or later;
Requires Android version 4.4 or later;
Search”LEDHue”in App Store or Google pay or scan this QR code to download and install the App:
Working mode and connecting:
AP(Access Point) mode:
Controller and Phone connect directly, controller works as an access point.
Connect steps:
1.When the device is not connected to any WIFI network, power on the controller and wait for 20s and then controller will switch into AP mode ;
2.In the WIFI setting page, find and connect the controller(named like SP108E_xxx, the default pin code is 12345678),
3.Open the LED Shop App, then the controller will be showed on the device list;
STA(Station) mode:
Controller and phone are in one same WIFI network, in this network, users can operate the controller smoothly.
Connect steps:
1. When the device is not connected to any WIFI network,power on the controller, controller will be remain in Wait-For-Connet mode for 20 seconds;
2. Make sure that your phone is connected to a WIFI network, Open LED Shop APP, pressing the Add Device button,
input the WIFI pin code, then press the OK to confirm and wait for the configure processing finish;
3. When controller successfully enter the WIFI network, it will be showed on the device list;
4. User can select the controller and remove it out of the network by pressing the Remove Device button, then the controller will switch into AP mode.
Package included:
1 * bluetooth led controller
Specification:
Working voltage : DC5V~12V
Working current: 20mA~130mA
Working temperature: -20￢ﾄﾃ~60￢ﾄﾃ
Remote distance :30 meters
Product size: 85mm*45mm*22mm
Feature:
1. Long distance APP remote control via WIFI;
2. Support routing mode(AP) and LAN connection mode(STA);
3. Support almost every kind of one-wire or two-wire LED driver IC ;
4. Brightness adjustable, With 180 kinds of patterns and 8 kind of color adjustable patterns;
5.Creatively using from-image-to-effect method for user to DIY any effect;
6. Support setting pixel number and segments number, able to control up to 2048 pixels;
5. DC5V~12V wide range working voltage, preventing reverse connection of power supply;
6. User setting saving;
App control:
Both IOS version and Android OS version are available. (hardware should support WIFI)
Requires IOS version 10.0 or later;
Requires Android version 4.4 or later;
Search”LEDHue”in App Store or Google pay or scan this QR code to download and install the App:
Working mode and connecting:
AP(Access Point) mode:
Controller and Phone connect directly, controller works as an access point.
Connect steps:
1.When the device is not connected to any WIFI network, power on the controller and wait for 20s and then controller will switch into AP mode ;
2.In the WIFI setting page, find and connect the controller(named like SP108E_xxx, the default pin code is 12345678),
3.Open the LED Shop App, then the controller will be showed on the device list;
STA(Station) mode:
Controller and phone are in one same WIFI network, in this network, users can operate the controller smoothly.
Connect steps:
1. When the device is not connected to any WIFI network,power on the controller, controller will be remain in Wait-For-Connet mode for 20 seconds;
2. Make sure that your phone is connected to a WIFI network, Open LED Shop APP, pressing the Add Device button,
input the WIFI pin code, then press the OK to confirm and wait for the configure processing finish;
3. When controller successfully enter the WIFI network, it will be showed on the device list;
4. User can select the controller and remove it out of the network by pressing the Remove Device button, then the controller will switch into AP mode.
Package included:
1 * bluetooth led controller