DC5-24V bluetooth Smart APP Control Magic Color Controller for 2811 2812 LED Pixel Strip Light
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 15 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Returns
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Bob Shop ID
615096996
Specification:
Working voltage : DC5-24V
Working current:?20mA~130mA
Working temperature: -20a??~60a??
Remote distance :30 meters
Product size: 85mm*45mm*22mm
?
Feature:
1.?Long?distance?APP remote control via WIFI;
2.?Support routing mode(AP)?and LAN connection mode(STA);
3. Support almost every kind of one-wire or two-wire LED driver IC ;
4. Brightness adjustable,?With 180?kinds of patterns?and 8 kind of color adjustable patterns;
5.Creatively using?from-image-to-effect?method for user to?DIY?any effect;
6. Support setting pixel number?and segments number,?able to control up to 2048?pixels;
5. DC5V~12V wide?range?working voltage,?preventing reverse connection of?power supply;
6. User setting saving;
?
App?control:
?Both IOS?version?and Android OS?version are available. (hardware should support?WIFI)
Requires?IOS version?10.0?or later;
Requires Android?version?4.4?or later;
Searcha??LEDHuea??in App or Google pay?or scan this?QR code to download and install the App:
?
Working m ode and c onnecting:
AP(Access Point) mode:
Controller and Phone connect directly, controller works as an access point.
Connect steps:
1.When the device is not connected to any WIFI network, power on the controller and wait for 20s?and then controller will switch into? AP?mode ;
2.In the WIFI setting page,?find and connect the controller(named like? SP108E_xxx, the default pin code is 12345678),
3.Open the LED Shop App,?then the controller will be showed on the device list;
?
STA(Station)? mode:
Controller and phone are in one same WIFI network, in this network, users can operate the controller smoothly.
Connect steps:
1.?When the device is not connected to any WIFI network,power on the controller,?controller?will be remain in?Wait-For-Connet?mode for 20 seconds;
2.?Make sure that your phone is connected to a WIFI network, Open LED Shop APP, pressing the?Add Device?button,
input the WIFI pin code, then press the?OK?to confirm and wait for the configure processing finish;
3.?When controller successfully enter the WIFI network, it will be showed on the device list;
4.?User can select the controller and remove it out of the network by pressing the?Remove Device?button,?then the controller will switch into AP mode.
Package included:
1 * bluetooth led controller
Working voltage : DC5-24V
Working current:?20mA~130mA
Working temperature: -20a??~60a??
Remote distance :30 meters
Product size: 85mm*45mm*22mm
?
Feature:
1.?Long?distance?APP remote control via WIFI;
2.?Support routing mode(AP)?and LAN connection mode(STA);
3. Support almost every kind of one-wire or two-wire LED driver IC ;
4. Brightness adjustable,?With 180?kinds of patterns?and 8 kind of color adjustable patterns;
5.Creatively using?from-image-to-effect?method for user to?DIY?any effect;
6. Support setting pixel number?and segments number,?able to control up to 2048?pixels;
5. DC5V~12V wide?range?working voltage,?preventing reverse connection of?power supply;
6. User setting saving;
?
App?control:
?Both IOS?version?and Android OS?version are available. (hardware should support?WIFI)
Requires?IOS version?10.0?or later;
Requires Android?version?4.4?or later;
Searcha??LEDHuea??in App or Google pay?or scan this?QR code to download and install the App:
?
Working m ode and c onnecting:
AP(Access Point) mode:
Controller and Phone connect directly, controller works as an access point.
Connect steps:
1.When the device is not connected to any WIFI network, power on the controller and wait for 20s?and then controller will switch into? AP?mode ;
2.In the WIFI setting page,?find and connect the controller(named like? SP108E_xxx, the default pin code is 12345678),
3.Open the LED Shop App,?then the controller will be showed on the device list;
?
STA(Station)? mode:
Controller and phone are in one same WIFI network, in this network, users can operate the controller smoothly.
Connect steps:
1.?When the device is not connected to any WIFI network,power on the controller,?controller?will be remain in?Wait-For-Connet?mode for 20 seconds;
2.?Make sure that your phone is connected to a WIFI network, Open LED Shop APP, pressing the?Add Device?button,
input the WIFI pin code, then press the?OK?to confirm and wait for the configure processing finish;
3.?When controller successfully enter the WIFI network, it will be showed on the device list;
4.?User can select the controller and remove it out of the network by pressing the?Remove Device?button,?then the controller will switch into AP mode.
Package included:
1 * bluetooth led controller