Diagnostics cable -VW, SEAT and AUDI.. Vag-Com USB Interface KKL 409.1 OBD2 OBD

CD INCLUDED!!!

Description :
This VAG_COM OBD II interface enables you to connect your PC to your car so that you can troubleshoot any problems in your vehicle by reading the Diagnostic Trouble Codes (DTC’s) that appear when the ‘check engine’ light is showing.

This adapter is fully compatible with the diagnostic software version 409.1 from VAG-COM – a software programme that turns your PC into a sophisticated Audi or VW diagnostic tool.

Benefits

• Save on expensive garage fees by diagnosing your car’s faults
• Don’t fork out for the expensive VAG-1551 or VAG-1552 scan tools - purchase this cable for a fraction of the cost and download the VAG-COM software instead

Features

• Supports VAG-COM version 409.1 or older
• Fully automatic support for 2002+ Audi models with dual K-lines
• High quality precision moulded diagnostic connector made to fit all Audi/VW vehicles
• LED light shows cable communication status
• Fully CE approved
• In-built electronic protection from ‘aftermarket radio problems’
• This purchase is for one 170cm long, 16 pin OBD diagnostic socket to RS232 9 pin interface cable with COM Port connector

About VAG-COM

VAG-COM is a Windows based diagnostic software for Volkswagen, Audi, Seat and Skoda vehicles that emulates the functions of expensive professional scan tools. It is:

• Fully compatible with all models of the above makes of car or van produced between 1996 and 2006 (see below for more information on earlier models)
• Compatible with the above makes of car with CAN connection
• Has a data base of more than 7500 fault codes and measuring block texts
• Can use the new 7 digit PIN/SKC codes to match new keys in all immobilizer-equipped W, Audi, Seat and Skoda models

Is my Car VAG-COM Compatible?

VAG-COM will work with most Volkswagen and Audi models sold worldwide from 1994 onwards. It will also work with most late-model SEAT and Skodas sold outside of N. America.

If your VW or Audi has a 16pin OBD II style Data Link Connector then VAG-COM will work. If your car has the old 2x2 Data Link Connection check to see if there is a wire going to each pin - if there are 4 wires VAG-COM should work – if there are only 3 it won’t.

What System Requirements do I Need?

A PC or laptop that is running Windows 95, 98, ME, NT4, 2000 or XP. A Pentium 100 (or AMD equivalent) that has 16MB of RAM is recommended. VAG-COM only needs 1MB or less, so availability of disk-space is not a problem.

How to get Started

• Download the shareware 409.1 for a free trial or purchase the registered version from the manufacturer’s website:www.ross-tech.com
• Run it, follow the prompts and let it install (on your PC or laptop’s hard disk)
• Plug one end of the interface into a serial (RS232) port on your PC and the other into your car’s OBD II port
• Turn on the ignition without starting the engine
• Start the VAG-COM programme, click ‘options’, select the correct communications port and run the test to confirm that the programme is working and can find the interface. Click ‘save’.

We want to make it even easier for you to use your OBDII COM cable, so here are some links to more sites where you can download the software:

Free Software

• Scantool  
• OBD Gauge  by Dana Peters
• OBD Logger by Jonathan Senkerik
• OBD-II ScanMasterby Wladimir Gurskij
• obd2crazy  
• OBD2 Scantool by Ivan Andrewjeski
• OBDII for ELM322 by David Huffman
• RDDTC by Pete Calinski
• Real Scan by Brent Harris
• ScanTest by Ivan Ganev

Clours of cable may vary