This item has closed with no items sold
View the relisted Item
View the relisted Item
View other items offered by szulou1659
Digital Magnetic Z Axis Tool Dial Zero Pre Setter Gage Offset CNC Metric Inch 0.01mm/0.0005" Magneti
New
R1,196.00
Closed
11 May 24 00:25
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 15 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Returns
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Bob Shop ID
612455077
Instructions: ? 1. Before using, press the cutter shaft a few times to check whether the slide is smooth. 2. Wipe the bottom of the tool setting tool with the clean and soft cotton cloth and the zero base surface. 3. Wipe the workbench or workpiece that needs to be determined to the distance of the tool tip. 4. Place the tool setting tool upside down on the workbench or flat surface, and press down gently to ensure that the zero setting base surface and the work table or plane are completely fitted. Press the ON/OFF/ZERO key to set the zero position. . 5. After the zero position is set, set the tool setting tool on the table or workpiece plane directly below the machine tool tip, move the tool tip slowly down, touch the surface of the tool axis, and continue to slowly adjust downward until the LCD The degree on the display is 0.00mm. At this time, the distance from the tip to the table or the plane of the workpiece is 50 mm + / 0.01 mm. Zero the Z axis on the device at this time, then move the Z axis of the device to a safe distance, take the tool to the tool, and then move the Z axis down to the previously set zero position. At this time, the tool tip reaches the workbench. Or the distance of the workpiece plane is 50 +/- 0.01 mm. According to the actual needs, adjust the distance from the tool tip to the work surface or the workpiece plane to complete the tool setting. ? Features: ? 1. Large screen LCD display, clear and easy to read 2. Mm/in button; in the power-on state, tap this button to convert the metric inch unit 3. ON/OFF/ZERO: Short press this button to start and zero setting; long press for 3 seconds to shut down. 4. Powered by a 1.5v button battery (not included) 5. Body height 50mm 6. Range 5mm 7. Reading resolution: 0.01mm/0.0005a?? 8. Repeatability: 0.01mm/0.0005a?? ? Package included: ? 1 * Z Axis Tool Dial Zero Pre-Setter Gage 1 * Box ? Details pictures:
