Main centres: | 1-3 business days |
Regional areas: | 3-4 business days |
Remote areas: | 3-5 business days |
Condition: 100% brand new
Item Type: Visual door viewer
Material: ABS plastic
Optional Color: Gold, silver
Screen Size: 2.8 inch TFT LCD display
Material: ABS engineering plastic
Screen Resolution: 320240
Functions: Infrared night vision, Dingdong doorbell, camera function
Storage Method: Built-in memory, cyclic storage, no card needed
Suitable for Door Hole Diameter: Approx.14-22mm/0.6-0.9in
Indoor Unit Battery: 1.5V AAA x 4 (not included)
Product Size:
Indoor Unit: Approx.127x68x13mm/52.70.5in
Outdoor Unit: Approx.58x13mm/2.30.5in
Infrared Light: 2 x 850nm
Use Environment: -20-55
Viewing Angle: 90 degree wide angle
Support Door Thickness: Approx.35-110MM/1.44.3in
Door Hole Diameter: Approx.14-30MM/0.61.2in
Installation:
Step 1: According to the thickness of the door, choose a screw of appropriate length and screw it into the protruding rod of the outdoor unit.
Step 2: Tear off the release paper from the anti-slip mat on the back of the outdoor unit, pass the guide rod and the cable through the viewer on the door and firmly press the outdoor unit on the door (note the correct direction, the button is directly below) .
Step 3: Take out the metal hanging plate (the end marked "UP" is facing upwards), pass the cable through the small rectangular hole on the hanging plate, insert the screw into the gourd hole on the hanging plate, and tighten the screw until the hanging plate and the outdoor unit are firmly fixed.
Step 4: Remove the battery compartment cover, insert 4 AAA 1.5V batteries (NOT Included) according to the positive and negative poles on the outside of the battery compartment cover, and buckle the battery cover.
Step 5: Fasten the flat cable to the female connector on the back of the indoor unit.
Step 6: Align the 4 slots on the back of the indoor unit with the 4 hooks on the metal hanging plate and pull it down to the locked state.
Package List: